Dormer E500M11NO3 5975486 Machine Tap Straight Flute 3FL M11 x 1.50 mm
- Write a review
$23.13
Basic StandardISO 529Clamping Length - millimeter (LSC)9Clamping width - fractional inch (WSC)6.3Clamping width - inch0.248CoatingBrightConnection diameter - inch (DCON MS)0.315Connection diameter - millimeter (DCON MS)8EDP number94013Flute count (NOF)3Flute Geometry (FDC)Straight Flute GeometryHand (Cutting direction)RightMaterialHSSMaterial applicationP - Steel and cast steelMID number5975486Ordering code ANSIE500M11NO3Overall length - inch (OAL)3.3465Overall length - millimeter (OAL)85Premachined hole diameter - inch (PHD)0.374Premachined hole diameter - millimeter (PHD)9.5ShankCylindrical shank with SquareThread diameter size (TDZ)11Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.0591Thread pitch - millimeter (TP)1.5Threading length - inch (THL)0.748Threading length - millimeter (THL)19Usable length (ULDR)1.5
Specifications
| Basic Standard | ISO 529 |
| Clamping Length - millimeter (LSC) | 9 |
| Clamping width - fractional inch (WSC) | 6.3 |
| Clamping width - inch | 0.248 |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 0.315 |
| Connection diameter - millimeter (DCON MS) | 8 |
| EDP number | 94013 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Straight Flute Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS |
| Material application | P - Steel and cast steel |
| MID number | 5975486 |
| Ordering code ANSI | E500M11NO3 |
| Overall length - inch (OAL) | 3.3465 |
| Overall length - millimeter (OAL) | 85 |
| Premachined hole diameter - inch (PHD) | 0.374 |
| Premachined hole diameter - millimeter (PHD) | 9.5 |
| Shank | Cylindrical shank with Square |
| Thread diameter size (TDZ) | 11 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.0591 |
| Thread pitch - millimeter (TP) | 1.5 |
| Threading length - inch (THL) | 0.748 |
| Threading length - millimeter (THL) | 19 |
| Usable length (ULDR) | 1.5 |
5975486
