Dormer E9105/16 7350445 Machine Tap Red Shark for Alloy Steels Spiral Flute 3FL 5/16 inch x 24
- Write a review
$30.90
Basic StandardDIN/ANSIClamping width - inch0.236CoatingTiAlN/TopCoating property (CTP)1Connection diameter - inch (DCON MS)0.318Connection diameter - millimeter (DCON MS)8.08Coolant supply property (CSP)IEDP number7350445Flute count (NOF)3Flute Geometry (FDC)Spiral Flute GeometryFlute helix angle (FHA)45Hand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationP - Steel and cast steelMID number7350445Ordering code ANSIE9105/16Overall length - inch (OAL)3.543Overall length - millimeter (OAL)0.318Premachined hole diameter - imperial (PHD)IPremachined hole diameter - inch (PHD)0.2717Premachined hole diameter - millimeter (PHD)45ShankCylindrical shank with SquareTap chamfer style (TCS)C 2 - 3Thread diameter - millimeter (TD)6.9Thread diameter size (TDZ)5/16Thread form (THFT)UNF - Unified FineThreading length - inch (THL)0.472Threads per inch (TPI)24Tolerance limitH4Usable length (ULDR)2.5Usable Length - inch (LU)1.339
Specifications
| Basic Standard | DIN/ANSI |
| Clamping width - inch | 0.236 |
| Coating | TiAlN/Top |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.318 |
| Connection diameter - millimeter (DCON MS) | 8.08 |
| Coolant supply property (CSP) | I |
| EDP number | 7350445 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Spiral Flute Geometry |
| Flute helix angle (FHA) | 45 |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | P - Steel and cast steel |
| MID number | 7350445 |
| Ordering code ANSI | E9105/16 |
| Overall length - inch (OAL) | 3.543 |
| Overall length - millimeter (OAL) | 0.318 |
| Premachined hole diameter - imperial (PHD) | I |
| Premachined hole diameter - inch (PHD) | 0.2717 |
| Premachined hole diameter - millimeter (PHD) | 45 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | C 2 - 3 |
| Thread diameter - millimeter (TD) | 6.9 |
| Thread diameter size (TDZ) | 5/16 |
| Thread form (THFT) | UNF - Unified Fine |
| Threading length - inch (THL) | 0.472 |
| Threads per inch (TPI) | 24 |
| Tolerance limit | H4 |
| Usable length (ULDR) | 2.5 |
| Usable Length - inch (LU) | 1.339 |
7350445