Pramet HNGX 0604ANSN-F:M9340 6755627 Milling Insert - Face
- Write a review
$16.39
ChipbreakerFCoatingM9340Coating processMT-CVDCoating property (CTP)1Cooling effectVery negative effect on tool life - cooling is not recommendedDepth of cut maximum - inch (APMX)0.118Depth of cut maximum - millimeter (APMX)3Depth of cut minimum - inch (APMN)0.012Depth of cut minimum - millimeter (APMN)0.3Feed maximal - millimeter0.17Feed minimal - millimeter0.08Feed_MAX_IMP_NUM0.007Feed_MIN_IMP_NUM0.003Fixing hole diameter - inch (D1)0.146Fixing hole diameter - millimeter (D1)3.7Inscribed circle diameter - inch (IC)0.413Inscribed circle diameter - millimeter (IC)10.5Insert shape code (SC)H - hexagonalInsert thickness - inch (S)0.187Insert thickness - millimeter (S)4.76
Specifications
| Chipbreaker | F |
| Coating | M9340 |
| Coating process | MT-CVD |
| Coating property (CTP) | 1 |
| Cooling effect | Very negative effect on tool life - cooling is not recommended |
| Depth of cut maximum - inch (APMX) | 0.118 |
| Depth of cut maximum - millimeter (APMX) | 3 |
| Depth of cut minimum - inch (APMN) | 0.012 |
| Depth of cut minimum - millimeter (APMN) | 0.3 |
| Feed maximal - millimeter | 0.17 |
| Feed minimal - millimeter | 0.08 |
| Feed_MAX_IMP_NUM | 0.007 |
| Feed_MIN_IMP_NUM | 0.003 |
| Fixing hole diameter - inch (D1) | 0.146 |
| Fixing hole diameter - millimeter (D1) | 3.7 |
| Inscribed circle diameter - inch (IC) | 0.413 |
| Inscribed circle diameter - millimeter (IC) | 10.5 |
| Insert shape code (SC) | H - hexagonal |
| Insert thickness - inch (S) | 0.187 |
| Insert thickness - millimeter (S) | 4.76 |
6755627
