TBWOODS 27H100 -SDS TIM Pulley
- Write a review
$400.00
Belt width1.000 inBore typeQuick disconnect bushingBushingSDSBushing bore range1/2 - 1 15/16Dimension1.31Face width1.31FlangesWith FlangesGroove profileHHub length0.81Hub location0.56I.D.3.31Inertia WR2 (lbs ft2)0.06Inertia WR²7Inside hub projection0Material typeCast ironNumber of grooves27Number of hubs0Number of teeth27O.D.4.24O.D. (in)4.243Outside hub projection0Pitch1/2 in (H)Pitch diameter4.3Rim face1.3125RPM upper limit5900Tooth pitch1/2
Specifications
| Belt width | 1.000 in |
| Bore type | Quick disconnect bushing |
| Bushing | SDS |
| Bushing bore range | 1/2 - 1 15/16 |
| Dimension | 1.31 |
| Face width | 1.31 |
| Flanges | With Flanges |
| Groove profile | H |
| Hub length | 0.81 |
| Hub location | 0.56 |
| I.D. | 3.31 |
| Inertia WR2 (lbs ft2) | 0.06 |
| Inertia WR² | 7 |
| Inside hub projection | 0 |
| Material type | Cast iron |
| Number of grooves | 27 |
| Number of hubs | 0 |
| Number of teeth | 27 |
| O.D. | 4.24 |
| O.D. (in) | 4.243 |
| Outside hub projection | 0 |
| Pitch | 1/2 in (H) |
| Pitch diameter | 4.3 |
| Rim face | 1.3125 |
| RPM upper limit | 5900 |
| Tooth pitch | 1/2 |
27H100
