TIMKEN 711181 Small Bore Inch Seal
- Write a review
$19.70
56 mm Outer Diameter2.21 in56.13 mm Overall width0.276 in7 mm Series711000 Shaft Size:1.614 inHelix typeClockwise-Spiral Lip Design Housing bore:2.205 inHelix TypeClockwise-Spiral Lip DesignHousing Bore2.205 inInch/MetricMETRICMaterialFluoro-ElastomerOuter Diameter2.21 inOverall Width0.276 inSeries711000Shaft Size1.614 in
Specifications
| Ability to Relubricate | Yes |
| Backside Shield/Seal | Optional backside shield available order separate |
| Bearing Insert Finish | Phosphorus Nickel Coated |
| Bearing Insert Material | 52100 Bearing Steel |
| Bearing Type | Standard Duty |
| Bolt Size (in) | 5/8 |
| Bolt Spacing (in) | 5.125 |
| Bore Diameter (in) | 2.1875 |
| Bore Shape | Straight |
| Cage Material | PPS - Polyphenylene Sulfide |
| Cage Type | Land Riding Retainer |
| Certifications | IP69K |
| Dynamic Load Rating (lb) | 9752 |
| End Cap | Yes |
| Fixed vs. Expansion | Fixed |
| Foot Height (in) | 0.81 |
| Grease Fitting Thread Size | 1/8 NPT |
| Height | 2.44 |
| Housing | Flange, Four Bolt |
| Housing Backside Inner Diameter | 4.25 |
| Housing Color | Silver |
| Housing Construction | One Piece |
| Housing Material | Stainless Steel |
| Housing Style | Flange Block |
| Inner Race Heat Treat Method | Zone-Hardened |
| Inner Ring OD (in) | 2.723 |
| Insert | PN-35 |
| Length | 6.75 |
| Length Through Bore (in) | 2.184 |
| Lubricant | Calcium Sulfonate NLGI 2 NSF H1 Food Grade Grease |
| Max Operating Temperature (F) | 220 |
| Maximum Speed (RPM) | 1350 |
| Misalignment Capability | ±2.0° Misalignment - Static Only |
| Misalignment Type | Static Only |
| Outer Ring Land Profile | Standard |
| Overall Height (in) | 2.313 |
| Overall Length (in) | 6.38 |
| Overall Width (in) | 6.38 |
| Pilot Configuration | No Pilot |
| Radial Clearance | Standard |
| Rolling element | Ball Bearing |
| Seal | Multi-Lip Contact Seal |
| Shaft Locking Type | Set Screw |
| Size Code | 2-23 |
| Static Load Rating (lb) | 6601 |
| Width | 6.5 |
711181
