- New
JET 350128 JMD-18PFN Mill/Drill With NEWALL DP700 DRO
- Write a review
$7,099.00
Base Dimensions (In.)15-3/4 x 23-3/4Column Diameter (In.)4-1/2Face Mill Capacity (In.)3Height43.5 inLength42.5 inMax Distance Spindle to Table (In.)28Motor (HP)2 HP,115/230V, 1 Ph, Prewired 115VNumber of Spindle Speeds12Overall Dimensions (L x W x H) (In.)47 x 40 x 51PowerfeedDownfeedQuill Diameter (In.)3Quill Down Feed Rates (IPR)0.0047, 0.007, 0.001Range of Spindle Speeds (RPM)150 - 3,000Spindle Taper (In. x TPI)R-8Spindle Travel (In.)5Spindle Travel Auto (In.)4-1/4Swing (In.)15-7/8T-Slot Centers (In.)1-13/16T-Slots Number and Size (In.)4 and 5/8Table Longitudinal Travel (In.)20-1/2Table Size (L x W) (In.)9-1/2 x 31-3/4Weight (Lbs.)700Width39.75 inWork Table Weight Capacity (Lbs.)400
Specifications
| Base Dimensions (In.) | 15-3/4 x 23-3/4 |
| Column Diameter (In.) | 4-1/2 |
| Face Mill Capacity (In.) | 3 |
| Height | 43.5 in |
| Length | 42.5 in |
| Max Distance Spindle to Table (In.) | 28 |
| Motor (HP) | 2 HP,115/230V, 1 Ph, Prewired 115V |
| Number of Spindle Speeds | 12 |
| Overall Dimensions (L x W x H) (In.) | 47 x 40 x 51 |
| Powerfeed | Downfeed |
| Quill Diameter (In.) | 3 |
| Quill Down Feed Rates (IPR) | 0.0047, 0.007, 0.001 |
| Range of Spindle Speeds (RPM) | 150 - 3,000 |
| Spindle Taper (In. x TPI) | R-8 |
| Spindle Travel (In.) | 5 |
| Spindle Travel Auto (In.) | 4-1/4 |
| Swing (In.) | 15-7/8 |
| T-Slot Centers (In.) | 1-13/16 |
| T-Slots Number and Size (In.) | 4 and 5/8 |
| Table Longitudinal Travel (In.) | 20-1/2 |
| Table Size (L x W) (In.) | 9-1/2 x 31-3/4 |
| Weight (Lbs.) | 700 |
| Width | 39.75 in |
| Work Table Weight Capacity (Lbs.) | 400 |
350128
