Fasco D923 Direct Drive Motor
- Write a review
$140.68
Ambient temperature (°C)60Amperage2.9-2.2-1.7Bearings DE TypeSleeveBearings ODE TypeSleeveCENCountry of originMexicoCountry of OriginThailandCSAYDiameter5.6"Drive end bearingBallDutyContinuous air overElectrical typePermanent split capacitorElectrical TypePSCEnclosureOpen Drip ProofFrame48ZFrame length4.57 inFrame MaterialRolled steelFrequency60 HzHeight5.63"HP1/3-1/4-1/5Insulation classBKW0.25Length15.00"MaterialRolled SteelMotor orientationAnyMountingExtended StudsNumber of speeds1Opp drive end bearingBallOutput HP1/3 HPOutput KW0.25 kWOverall Length11.73 inOverloadAutomaticPackaged height6.02 inPackaged length14.24 inPackaged width6.04 inPhaseSinglePoles8Replaced By6005 , D1036 , EM3586RotationReversibleService factor1Shaft diameter0.500 inShaft Diameter0.500Shaft extension6.42Shaft Extension5.94Shaft typeDouble flatShaft TypeDouble FlatSpeed825 RPMThermal protectionThermally protectedULRecognizedVoltage208-230Width5.63"
Specifications
| Ambient temperature (°C) | 60 |
| Amperage | 2.9-2.2-1.7 |
| Bearings DE Type | Sleeve |
| Bearings ODE Type | Sleeve |
| CE | N |
| Country of origin | Mexico |
| Country of Origin | Thailand |
| CSA | Y |
| Diameter | 5.6" |
| Drive end bearing | Ball |
| Duty | Continuous air over |
| Electrical type | Permanent split capacitor |
| Electrical Type | PSC |
| Enclosure | Open Drip Proof |
| Frame | 48Z |
| Frame length | 4.57 in |
| Frame Material | Rolled steel |
| Frequency | 60 Hz |
| Height | 5.63" |
| HP | 1/3-1/4-1/5 |
| Insulation class | B |
| KW | 0.25 |
| Length | 15.00" |
| Material | Rolled Steel |
| Motor orientation | Any |
| Mounting | Extended Studs |
| Number of speeds | 1 |
| Opp drive end bearing | Ball |
| Output HP | 1/3 HP |
| Output KW | 0.25 kW |
| Overall Length | 11.73 in |
| Overload | Automatic |
| Packaged height | 6.02 in |
| Packaged length | 14.24 in |
| Packaged width | 6.04 in |
| Phase | Single |
| Poles | 8 |
| Replaced By | 6005 , D1036 , EM3586 |
| Rotation | Reversible |
| Service factor | 1 |
| Shaft diameter | 0.500 in |
| Shaft Diameter | 0.500 |
| Shaft extension | 6.42 |
| Shaft Extension | 5.94 |
| Shaft type | Double flat |
| Shaft Type | Double Flat |
| Speed | 825 RPM |
| Thermal protection | Thermally protected |
| UL | Recognized |
| Voltage | 208-230 |
| Width | 5.63" |
D923
