Pramet LCMR 0516MO-MP:T8330 6754729 Turning Insert - Parting And Grooving
- Write a review
$16.75
ChipbreakerMPCoatingT8330Coating processPVDCoating property (CTP)1Cooling effectVery positive effect on tool life - cooling is recommendedCorner radius - inch (RE)0.098Corner radius - millimeter (RE)2.5Cutting depth maximum - inch (CDX)0.098Cutting depth maximum - millimeter (CDX)2.5Cutting depth minimum - millimeter (CDN)0.8Cutting width - inch (CW)0.197Cutting width - millimeter (CW)5Cutting width lower tolerance - inch (CWTOLL)-0.002Cutting width lower tolerance - millimeter (CWTOLL)-0.05Cutting width upper tolerance - inch (CWTOLU)0.002Cutting width upper tolerance - millimeter (CWTOLU)0.05Feed maximal - millimeter0.7Feed minimal - millimeter0.07Feed_MAX_IMP_NUM0.028Feed_MIN_IMP_NUM0.003Insert length - inch (INSL)0.646Insert length - millimeter (INSL)18.1Insert shape code (SC)L - rectangularISO_CuttingDepth_MIN_IMP_NUM0.031
Specifications
| Chipbreaker | MP |
| Coating | T8330 |
| Coating process | PVD |
| Coating property (CTP) | 1 |
| Cooling effect | Very positive effect on tool life - cooling is recommended |
| Corner radius - inch (RE) | 0.098 |
| Corner radius - millimeter (RE) | 2.5 |
| Cutting depth maximum - inch (CDX) | 0.098 |
| Cutting depth maximum - millimeter (CDX) | 2.5 |
| Cutting depth minimum - millimeter (CDN) | 0.8 |
| Cutting width - inch (CW) | 0.197 |
| Cutting width - millimeter (CW) | 5 |
| Cutting width lower tolerance - inch (CWTOLL) | -0.002 |
| Cutting width lower tolerance - millimeter (CWTOLL) | -0.05 |
| Cutting width upper tolerance - inch (CWTOLU) | 0.002 |
| Cutting width upper tolerance - millimeter (CWTOLU) | 0.05 |
| Feed maximal - millimeter | 0.7 |
| Feed minimal - millimeter | 0.07 |
| Feed_MAX_IMP_NUM | 0.028 |
| Feed_MIN_IMP_NUM | 0.003 |
| Insert length - inch (INSL) | 0.646 |
| Insert length - millimeter (INSL) | 18.1 |
| Insert shape code (SC) | L - rectangular |
| ISO_CuttingDepth_MIN_IMP_NUM | 0.031 |
6754729
