Dormer E5471/4NO2 5976330 G(BSP) Machine Tap Straight Flute 4FL 1/4 inch x 19
- Write a review
$43.45
Basic StandardISO 2284Clamping Length - millimeter (LSC)11Clamping width - fractional inch (WSC)8Clamping width - inch0.315CoatingBrightConnection diameter - inch (DCON MS)0.3937Connection diameter - millimeter (DCON MS)10Coolant supply property (CSP)13.157EDP number157206Flute count (NOF)4Flute Geometry (FDC)Straight Flute GeometryHand (Cutting direction)RightMaterialHSSMaterial applicationP - Steel and cast steelMID number5976330Ordering code ANSIE5471/4NO2Overall length - inch (OAL)2.6378Overall length - millimeter (OAL)67Premachined hole diameter - inch (PHD)0.4646Premachined hole diameter - millimeter (PHD)11.8ShankCylindrical shank with SquareThread diameter - inch (TD)0.518Thread diameter - millimeter (TD)13.157Thread diameter size (TDZ)1/4Thread form (THFT)G - British standard pipe fastening - G seriesThreading length - inch (THL)0.748Threading length - millimeter (THL)19Threads per inch (TPI)19Usable length (ULDR)1.5
Specifications
| Basic Standard | ISO 2284 |
| Clamping Length - millimeter (LSC) | 11 |
| Clamping width - fractional inch (WSC) | 8 |
| Clamping width - inch | 0.315 |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 0.3937 |
| Connection diameter - millimeter (DCON MS) | 10 |
| Coolant supply property (CSP) | 13.157 |
| EDP number | 157206 |
| Flute count (NOF) | 4 |
| Flute Geometry (FDC) | Straight Flute Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS |
| Material application | P - Steel and cast steel |
| MID number | 5976330 |
| Ordering code ANSI | E5471/4NO2 |
| Overall length - inch (OAL) | 2.6378 |
| Overall length - millimeter (OAL) | 67 |
| Premachined hole diameter - inch (PHD) | 0.4646 |
| Premachined hole diameter - millimeter (PHD) | 11.8 |
| Shank | Cylindrical shank with Square |
| Thread diameter - inch (TD) | 0.518 |
| Thread diameter - millimeter (TD) | 13.157 |
| Thread diameter size (TDZ) | 1/4 |
| Thread form (THFT) | G - British standard pipe fastening - G series |
| Threading length - inch (THL) | 0.748 |
| Threading length - millimeter (THL) | 19 |
| Threads per inch (TPI) | 19 |
| Usable length (ULDR) | 1.5 |
5976330
