2ACO6.5 016465 Jobber Drill DIN 338 6.50 mm
- Write a review
$7.22
ApplicationAngleIcon_DICT_SELDrill point 135°Basic StandardDIN 338CoatingBronzeConnection (shank) descriptionCylindrical shankConnection diameter - millimeter (DCON MS)6.5Cutting diameter - inch (DC)0.2559Cutting diameter - millimeter (DC)6.5Drill LengthJobberHand (Cutting direction)RightLength chip flute - millimeter (LCF)63Length chip flute - inch (LCF)2.4803MaterialHSS-EOverall length - millimeter (OAL)101Overall length - inch (OAL)3.9764Point Angle (SIG)135Spiral formStandard SpiralSurface treatementSteam TemperedUsable length (ULDR)4
Specifications
| ApplicationAngleIcon_DICT_SEL | Drill point 135° |
| Basic Standard | DIN 338 |
| Coating | Bronze |
| Connection (shank) description | Cylindrical shank |
| Connection diameter - millimeter (DCON MS) | 6.5 |
| Cutting diameter - inch (DC) | 0.2559 |
| Cutting diameter - millimeter (DC) | 6.5 |
| Drill Length | Jobber |
| Hand (Cutting direction) | Right |
| Length chip flute - millimeter (LCF) | 63 |
| Length chip flute - inch (LCF) | 2.4803 |
| Material | HSS-E |
| Overall length - millimeter (OAL) | 101 |
| Overall length - inch (OAL) | 3.9764 |
| Point Angle (SIG) | 135 |
| Spiral form | Standard Spiral |
| Surface treatement | Steam Tempered |
| Usable length (ULDR) | 4 |
2ACO6.5
