Dormer A218N1 5968986 120° Centre Drill - 90° Short ANSI N1
- Write a review
$6.32
ApplicationAngleIcon_DICT_SELCenter drilling 90°Basic StandardANSICoatingBrightConnection diameter - fractional inch (DCON MS)1/8Connection diameter - inch (DCON MS)0.125Connection diameter - millimeter (DCON MS)3.18Cutting diameter - inch (DC)0.0469Cutting diameter - millimeter (DC)1.19EDP number239292Hand (Cutting direction)RightInternal designation number1Length chip flute - fractional inch (LCF)3/8Length chip flute - inch (LCF)0.375MaterialHSSMaterial applicationK - Cast iron, P - Steel and cast steelMID number5968986Ordering code ANSIA218N1Overall length - fractional inch (OAL)1.1/4Overall length - millimeter (OAL)31.75Point Angle (SIG)120ShankCylindrical shankStep included angle (STA)90Usable length (ULDR)1
Specifications
| ApplicationAngleIcon_DICT_SEL | Center drilling 90° |
| Basic Standard | ANSI |
| Coating | Bright |
| Connection diameter - fractional inch (DCON MS) | 1/8 |
| Connection diameter - inch (DCON MS) | 0.125 |
| Connection diameter - millimeter (DCON MS) | 3.18 |
| Cutting diameter - inch (DC) | 0.0469 |
| Cutting diameter - millimeter (DC) | 1.19 |
| EDP number | 239292 |
| Hand (Cutting direction) | Right |
| Internal designation number | 1 |
| Length chip flute - fractional inch (LCF) | 3/8 |
| Length chip flute - inch (LCF) | 0.375 |
| Material | HSS |
| Material application | K - Cast iron, P - Steel and cast steel |
| MID number | 5968986 |
| Ordering code ANSI | A218N1 |
| Overall length - fractional inch (OAL) | 1.1/4 |
| Overall length - millimeter (OAL) | 31.75 |
| Point Angle (SIG) | 120 |
| Shank | Cylindrical shank |
| Step included angle (STA) | 90 |
| Usable length (ULDR) | 1 |
5968986
