Dormer E000M5 5973790 Machine Tap Spiral Point 3FL M5 x 0.80 mm
- Write a review
$14.05
Basic StandardISO 529Clamping Length - millimeter (LSC)7Clamping width - fractional inch (WSC)4Clamping width - inch0.1575CoatingBrightConnection diameter - inch (DCON MS)5EDP number567616Flute count (NOF)3Flute Geometry (FDC)Spiral Point GeometryHand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationN - Non-ferrous metals, P - Steel and cast steelMID number5973790Ordering code ANSIE000M5Overall length - inch (OAL)2.2835Overall length - millimeter (OAL)58Premachined hole diameter - inch (PHD)0.1654Premachined hole diameter - millimeter (PHD)4.2ShankCylindrical shank with SquareTap chamfer style (TCS)B 3.5 - 5Thread diameter size (TDZ)5Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.0315Thread pitch - millimeter (TP)0.8Threading length - inch (THL)0.4331Threading length - millimeter (THL)11Tolerance limitD4Usable length (ULDR)2.5Usable Length - inch (LU)0.8661Usable Length - millimeter (LU)22
Specifications
| Basic Standard | ISO 529 |
| Clamping Length - millimeter (LSC) | 7 |
| Clamping width - fractional inch (WSC) | 4 |
| Clamping width - inch | 0.1575 |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 5 |
| EDP number | 567616 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Spiral Point Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 5973790 |
| Ordering code ANSI | E000M5 |
| Overall length - inch (OAL) | 2.2835 |
| Overall length - millimeter (OAL) | 58 |
| Premachined hole diameter - inch (PHD) | 0.1654 |
| Premachined hole diameter - millimeter (PHD) | 4.2 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | B 3.5 - 5 |
| Thread diameter size (TDZ) | 5 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.0315 |
| Thread pitch - millimeter (TP) | 0.8 |
| Threading length - inch (THL) | 0.4331 |
| Threading length - millimeter (THL) | 11 |
| Tolerance limit | D4 |
| Usable length (ULDR) | 2.5 |
| Usable Length - inch (LU) | 0.8661 |
| Usable Length - millimeter (LU) | 22 |
5973790
