Dormer C3675.0 5984035 Slot Drill 5.00 mm
- Write a review
$38.85
Basic StandardDIN 327 DCoatingALCRONACoating property (CTP)1Connection diameter - inch (DCON MS)0.2362Connection diameter - millimeter (DCON MS)6Connection diameter tolerance machine side (TCDCONMS)h6Cut lengthExtra shortCutting diameter - inch (DC)0.1969Cutting diameter - millimeter (DC)5Cutting diameter tolerance class (TCDC)e8Depth of cut maximum - inch (APMX)0.315Depth of cut maximum - millimeter (APMX)8EDP number355374Flute count (NOF)3Flute helix angle (FHA)40MaterialHSS-E-PMMaterial applicationM - Stainless steel, N - Non-ferrous metals, P - Steel and cast steelMID number5984035Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsOrdering code ANSIC3675.0Overall length - inch (OAL)2.0472Overall length - millimeter (OAL)52Peripheral effective cutting edge count (ZEFP)3Radial rake angle (GAMF)15ShankWeldon shank DIN 1835B
Specifications
| Basic Standard | DIN 327 D |
| Coating | ALCRONA |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.2362 |
| Connection diameter - millimeter (DCON MS) | 6 |
| Connection diameter tolerance machine side (TCDCONMS) | h6 |
| Cut length | Extra short |
| Cutting diameter - inch (DC) | 0.1969 |
| Cutting diameter - millimeter (DC) | 5 |
| Cutting diameter tolerance class (TCDC) | e8 |
| Depth of cut maximum - inch (APMX) | 0.315 |
| Depth of cut maximum - millimeter (APMX) | 8 |
| EDP number | 355374 |
| Flute count (NOF) | 3 |
| Flute helix angle (FHA) | 40 |
| Material | HSS-E-PM |
| Material application | M - Stainless steel, N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 5984035 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Ordering code ANSI | C3675.0 |
| Overall length - inch (OAL) | 2.0472 |
| Overall length - millimeter (OAL) | 52 |
| Peripheral effective cutting edge count (ZEFP) | 3 |
| Radial rake angle (GAMF) | 15 |
| Shank | Weldon shank DIN 1835B |
5984035
