1788M3X.5NO3 1012940 Machine Tap SPRL FL 52D M3 x 0.50 mm
- Write a review
$12.14
Basic StandardANSIClamping width - inch0.11CoatingBrightConnection diameter - inch (DCON MS)0.141Connection diameter - millimeter (DCON MS)3.58Flute count (NOF)2Flute Geometry (FDC)Spiral Flute GeometryFlute helix angle (FHA)52Hand (Cutting direction)RightMaterialHSSOverall length - millimeter (OAL)0.141Overall length - fractional inch (OAL)1.15/16Overall length - inch (OAL)1.9375Premachined hole diameter - millimeter (PHD)52ShankCylindrical shank with SquareThread diameter size (TDZ)M3Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.0197Thread pitch - millimeter (TP)0.5Threading length - fractional inch (THL)5/8Tolerance limitD3Usable length (ULDR)2.5
Specifications
| Basic Standard | ANSI |
| Clamping width - inch | 0.11 |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 0.141 |
| Connection diameter - millimeter (DCON MS) | 3.58 |
| Flute count (NOF) | 2 |
| Flute Geometry (FDC) | Spiral Flute Geometry |
| Flute helix angle (FHA) | 52 |
| Hand (Cutting direction) | Right |
| Material | HSS |
| Overall length - millimeter (OAL) | 0.141 |
| Overall length - fractional inch (OAL) | 1.15/16 |
| Overall length - inch (OAL) | 1.9375 |
| Premachined hole diameter - millimeter (PHD) | 52 |
| Shank | Cylindrical shank with Square |
| Thread diameter size (TDZ) | M3 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.0197 |
| Thread pitch - millimeter (TP) | 0.5 |
| Threading length - fractional inch (THL) | 5/8 |
| Tolerance limit | D3 |
| Usable length (ULDR) | 2.5 |
1788M3X.5NO3
