Dormer EP01M3 5973452 Machine Tap Spiral Point 3FL M3 x 0.50 mm
- Write a review
$18.88
Basic StandardDIN 371Clamping Length - millimeter (LSC)6Clamping width - fractional inch (WSC)2.7Clamping width - inch0.1063CoatingSteam TemperedConnection diameter - inch (DCON MS)3.5EDP number136119Flute count (NOF)3Flute Geometry (FDC)Spiral Point GeometryHand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationP - Steel and cast steelMID number5973452Ordering code ANSIEP01M3Overall length - inch (OAL)2.2047Overall length - millimeter (OAL)56Premachined hole diameter - inch (PHD)0.0984Premachined hole diameter - millimeter (PHD)2.5ShankCylindrical shank with SquareTap chamfer style (TCS)B 3.5 - 5Thread diameter size (TDZ)3Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.0197Thread pitch - millimeter (TP)0.5Threading length - inch (THL)0.3543Threading length - millimeter (THL)9Tolerance limitD3Usable length (ULDR)2.5Usable Length - inch (LU)0.7087Usable Length - millimeter (LU)18
Specifications
| Basic Standard | DIN 371 |
| Clamping Length - millimeter (LSC) | 6 |
| Clamping width - fractional inch (WSC) | 2.7 |
| Clamping width - inch | 0.1063 |
| Coating | Steam Tempered |
| Connection diameter - inch (DCON MS) | 3.5 |
| EDP number | 136119 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Spiral Point Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | P - Steel and cast steel |
| MID number | 5973452 |
| Ordering code ANSI | EP01M3 |
| Overall length - inch (OAL) | 2.2047 |
| Overall length - millimeter (OAL) | 56 |
| Premachined hole diameter - inch (PHD) | 0.0984 |
| Premachined hole diameter - millimeter (PHD) | 2.5 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | B 3.5 - 5 |
| Thread diameter size (TDZ) | 3 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.0197 |
| Thread pitch - millimeter (TP) | 0.5 |
| Threading length - inch (THL) | 0.3543 |
| Threading length - millimeter (THL) | 9 |
| Tolerance limit | D3 |
| Usable length (ULDR) | 2.5 |
| Usable Length - inch (LU) | 0.7087 |
| Usable Length - millimeter (LU) | 18 |
5973452
