Dormer S2298.0 6706525 Ball-Nosed End Mill 8.00 mm
- Write a review
$85.20
Basic StandardDORMERCoatingTiSiNCoating property (CTP)1Connection diameter - inch (DCON MS)0.315Connection diameter - millimeter (DCON MS)8Corner radius - inch (RE)0.1575Corner radius - millimeter (RE)4Cut lengthExtra shortCutting diameter - inch (DC)0.315Cutting diameter - millimeter (DC)8Cutting diameter tolerance class (TCDC)h9Depth of cut maximum - inch (APMX)0.4724Depth of cut maximum - millimeter (APMX)12EDP number46706525Flute count (NOF)2Flute helix angle (FHA)30MaterialHMMaterial applicationM - Stainless steel, P - Steel and cast steel, S - High-temperature alloysMID number6706525Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsNeck diameter - inch (DN)0.2913Neck diameter - millimeter (DN)7.4Ordering code ANSIS2298.0Overall length - inch (OAL)2.5197Overall length - millimeter (OAL)64Peripheral effective cutting edge count (ZEFP)2Radial rake angle (GAMF)3ShankCylindrical shank DIN 6535 HAUsable Length - millimeter (LU)30
Specifications
| Basic Standard | DORMER |
| Coating | TiSiN |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.315 |
| Connection diameter - millimeter (DCON MS) | 8 |
| Corner radius - inch (RE) | 0.1575 |
| Corner radius - millimeter (RE) | 4 |
| Cut length | Extra short |
| Cutting diameter - inch (DC) | 0.315 |
| Cutting diameter - millimeter (DC) | 8 |
| Cutting diameter tolerance class (TCDC) | h9 |
| Depth of cut maximum - inch (APMX) | 0.4724 |
| Depth of cut maximum - millimeter (APMX) | 12 |
| EDP number | 46706525 |
| Flute count (NOF) | 2 |
| Flute helix angle (FHA) | 30 |
| Material | HM |
| Material application | M - Stainless steel, P - Steel and cast steel, S - High-temperature alloys |
| MID number | 6706525 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Neck diameter - inch (DN) | 0.2913 |
| Neck diameter - millimeter (DN) | 7.4 |
| Ordering code ANSI | S2298.0 |
| Overall length - inch (OAL) | 2.5197 |
| Overall length - millimeter (OAL) | 64 |
| Peripheral effective cutting edge count (ZEFP) | 2 |
| Radial rake angle (GAMF) | 3 |
| Shank | Cylindrical shank DIN 6535 HA |
| Usable Length - millimeter (LU) | 30 |
6706525
