Pramet SEET 09T3AFEN:M9340 6755675 Milling Insert - Face
- Write a review
$12.29
ChipbreakerWith chipbreaker -no designationCoatingM9340Coating processMT-CVDCoating property (CTP)1Cooling effectVery negative effect on tool life - cooling is not recommendedCutting edge length - inch (L)0.375Cutting edge length - millimeter (L)9.525Depth of cut maximum - inch (APMX)0.177Depth of cut maximum - millimeter (APMX)4.5Depth of cut minimum - inch (APMN)0.012Depth of cut minimum - millimeter (APMN)0.3Feed maximal - millimeter0.26Feed minimal - millimeter0.08Feed_MAX_IMP_NUM0.01Feed_MIN_IMP_NUM0.003Fixing hole diameter - inch (D1)0.138Fixing hole diameter - millimeter (D1)3.5Inscribed circle diameter - inch (IC)0.375Inscribed circle diameter - millimeter (IC)9.525Insert shape code (SC)S - squareInsert thickness - inch (S)0.156Insert thickness - millimeter (S)3.97m-dimension - inch (M)0.048m-dimension - millimeter (M)1.21
Specifications
| Chipbreaker | With chipbreaker -no designation |
| Coating | M9340 |
| Coating process | MT-CVD |
| Coating property (CTP) | 1 |
| Cooling effect | Very negative effect on tool life - cooling is not recommended |
| Cutting edge length - inch (L) | 0.375 |
| Cutting edge length - millimeter (L) | 9.525 |
| Depth of cut maximum - inch (APMX) | 0.177 |
| Depth of cut maximum - millimeter (APMX) | 4.5 |
| Depth of cut minimum - inch (APMN) | 0.012 |
| Depth of cut minimum - millimeter (APMN) | 0.3 |
| Feed maximal - millimeter | 0.26 |
| Feed minimal - millimeter | 0.08 |
| Feed_MAX_IMP_NUM | 0.01 |
| Feed_MIN_IMP_NUM | 0.003 |
| Fixing hole diameter - inch (D1) | 0.138 |
| Fixing hole diameter - millimeter (D1) | 3.5 |
| Inscribed circle diameter - inch (IC) | 0.375 |
| Inscribed circle diameter - millimeter (IC) | 9.525 |
| Insert shape code (SC) | S - square |
| Insert thickness - inch (S) | 0.156 |
| Insert thickness - millimeter (S) | 3.97 |
| m-dimension - inch (M) | 0.048 |
| m-dimension - millimeter (M) | 1.21 |
6755675
