Dormer A90017/64 5971377 130° PFX Jobber Drill DIN/ANSI 17/64 inch
- Write a review
$18.38
ApplicationAngleIcon_DICT_SELDrill point 130°Basic StandardDIN/ANSICoatingBrightConnection (shank) descriptionCylindrical shankConnection diameter - inch (DCON MS)0.2657Connection diameter - millimeter (DCON MS)6.75Cutting diameter - fractional inch (DC)17/64Cutting diameter - inch (DC)0.2656Cutting diameter - millimeter (DC)6.75Cutting diameter tolerance class (TCDC)h8Drill LengthJobberEDP number47019Hand (Cutting direction)RightLength chip flute - inch (LCF)2.874Length chip flute - millimeter (LCF)73MaterialHSS-EMaterial applicationM - Stainless steel, N - Non-ferrous metals, P - Steel and cast steel, S - High-temperature alloysMID number5971377Ordering code ANSIA90017/64Overall length - inch (OAL)4.1339Overall length - millimeter (OAL)105Point Angle (SIG)130Spiral formQuick SpiralSurface treatementOriginal surfaceUsable length (ULDR)6
Specifications
| ApplicationAngleIcon_DICT_SEL | Drill point 130° |
| Basic Standard | DIN/ANSI |
| Coating | Bright |
| Connection (shank) description | Cylindrical shank |
| Connection diameter - inch (DCON MS) | 0.2657 |
| Connection diameter - millimeter (DCON MS) | 6.75 |
| Cutting diameter - fractional inch (DC) | 17/64 |
| Cutting diameter - inch (DC) | 0.2656 |
| Cutting diameter - millimeter (DC) | 6.75 |
| Cutting diameter tolerance class (TCDC) | h8 |
| Drill Length | Jobber |
| EDP number | 47019 |
| Hand (Cutting direction) | Right |
| Length chip flute - inch (LCF) | 2.874 |
| Length chip flute - millimeter (LCF) | 73 |
| Material | HSS-E |
| Material application | M - Stainless steel, N - Non-ferrous metals, P - Steel and cast steel, S - High-temperature alloys |
| MID number | 5971377 |
| Ordering code ANSI | A90017/64 |
| Overall length - inch (OAL) | 4.1339 |
| Overall length - millimeter (OAL) | 105 |
| Point Angle (SIG) | 130 |
| Spiral form | Quick Spiral |
| Surface treatement | Original surface |
| Usable length (ULDR) | 6 |
5971377