1700M8X1.25NO3 1012473 Hand Tap M8 x 1.25 mm
- Write a review
$6.85
Basic StandardANSIClamping width - inch0.238CoatingBrightConnection diameter - inch (DCON MS)0.318Connection diameter - millimeter (DCON MS)8.08Flute count (NOF)4Flute Geometry (FDC)Straight Flute GeometryHand (Cutting direction)RightMaterialHSSOverall length - fractional inch (OAL)2.23/32Overall length - inch (OAL)2.7188ShankCylindrical shank with SquareThread diameter size (TDZ)M8Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.0492Thread pitch - millimeter (TP)1.25Threading length - fractional inch (THL)1.1/8Tolerance limitD5Usable length (ULDR)1.5
Specifications
| Basic Standard | ANSI |
| Clamping width - inch | 0.238 |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 0.318 |
| Connection diameter - millimeter (DCON MS) | 8.08 |
| Flute count (NOF) | 4 |
| Flute Geometry (FDC) | Straight Flute Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS |
| Overall length - fractional inch (OAL) | 2.23/32 |
| Overall length - inch (OAL) | 2.7188 |
| Shank | Cylindrical shank with Square |
| Thread diameter size (TDZ) | M8 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.0492 |
| Thread pitch - millimeter (TP) | 1.25 |
| Threading length - fractional inch (THL) | 1.1/8 |
| Tolerance limit | D5 |
| Usable length (ULDR) | 1.5 |
1700M8X1.25NO3
