Dormer S1373/16 7648826 End Mill 4FL 3/16 inch
- Write a review
$26.94
Basic StandardDORMERCoatingBrightConnection diameter - fractional inch (DCON MS)3/16Connection diameter - inch (DCON MS)0.1875Connection diameter - millimeter (DCON MS)4.76Cut lengthExtra longCutting diameter - fractional inch (DC)3/16Cutting diameter - inch (DC)0.1875Cutting diameter - millimeter (DC)4.76Cutting diameter tolerance class (TCDC)ANSI +.000/-.002Depth of cut maximum - fractional inch (APMX)1.1/8EDP number7648826Flute count (NOF)4Flute helix angle (FHA)30MaterialHMMaterial applicationK - Cast iron, M - Stainless steel, N - Non-ferrous metals, P - Steel and cast steelMID number7648826Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsOrdering code ANSIS1373/16Overall length - fractional inch (OAL)3"Overall length - inch (OAL)3Overall length - millimeter (OAL)76.2Radial rake angle (GAMF)10ShankCylindrical shank
Specifications
| Basic Standard | DORMER |
| Coating | Bright |
| Connection diameter - fractional inch (DCON MS) | 3/16 |
| Connection diameter - inch (DCON MS) | 0.1875 |
| Connection diameter - millimeter (DCON MS) | 4.76 |
| Cut length | Extra long |
| Cutting diameter - fractional inch (DC) | 3/16 |
| Cutting diameter - inch (DC) | 0.1875 |
| Cutting diameter - millimeter (DC) | 4.76 |
| Cutting diameter tolerance class (TCDC) | ANSI +.000/-.002 |
| Depth of cut maximum - fractional inch (APMX) | 1.1/8 |
| EDP number | 7648826 |
| Flute count (NOF) | 4 |
| Flute helix angle (FHA) | 30 |
| Material | HM |
| Material application | K - Cast iron, M - Stainless steel, N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 7648826 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Ordering code ANSI | S1373/16 |
| Overall length - fractional inch (OAL) | 3" |
| Overall length - inch (OAL) | 3 |
| Overall length - millimeter (OAL) | 76.2 |
| Radial rake angle (GAMF) | 10 |
| Shank | Cylindrical shank |
7648826
