Dormer C24618.0 5984162 End Mill 18.00 mm
- Write a review
$114.43
Basic StandardDIN 844 KCoatingTiCNCoating property (CTP)1Connection diameter - inch (DCON MS)0.6299Connection diameter - millimeter (DCON MS)16Cut lengthShortCutting diameter - inch (DC)0.7087Cutting diameter - millimeter (DC)18Cutting diameter tolerance class (TCDC)k10Depth of cut maximum - inch (APMX)1.2598Depth of cut maximum - millimeter (APMX)32EDP number354506Flute count (NOF)4Flute helix angle (FHA)30MaterialHSS-E-PMMaterial applicationK - Cast iron, N - Non-ferrous metals, P - Steel and cast steel, S - High-temperature alloysMID number5984162Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsNeck diameter - inch (DN)0.6102Neck diameter - millimeter (DN)15.5Ordering code ANSIC24618.0Overall length - inch (OAL)3.622Overall length - millimeter (OAL)92Peripheral effective cutting edge count (ZEFP)4Radial rake angle (GAMF)12ShankWeldon shank DIN 1835BUsable Length - millimeter (LU)43.5
Specifications
| Basic Standard | DIN 844 K |
| Coating | TiCN |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.6299 |
| Connection diameter - millimeter (DCON MS) | 16 |
| Cut length | Short |
| Cutting diameter - inch (DC) | 0.7087 |
| Cutting diameter - millimeter (DC) | 18 |
| Cutting diameter tolerance class (TCDC) | k10 |
| Depth of cut maximum - inch (APMX) | 1.2598 |
| Depth of cut maximum - millimeter (APMX) | 32 |
| EDP number | 354506 |
| Flute count (NOF) | 4 |
| Flute helix angle (FHA) | 30 |
| Material | HSS-E-PM |
| Material application | K - Cast iron, N - Non-ferrous metals, P - Steel and cast steel, S - High-temperature alloys |
| MID number | 5984162 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Neck diameter - inch (DN) | 0.6102 |
| Neck diameter - millimeter (DN) | 15.5 |
| Ordering code ANSI | C24618.0 |
| Overall length - inch (OAL) | 3.622 |
| Overall length - millimeter (OAL) | 92 |
| Peripheral effective cutting edge count (ZEFP) | 4 |
| Radial rake angle (GAMF) | 12 |
| Shank | Weldon shank DIN 1835B |
| Usable Length - millimeter (LU) | 43.5 |
5984162
