Pramet 100N3R128W100-ISSE09-C 6789713 End Milling Cutter - Face
- Write a review
$314.64
Axial rake angle (GAMP)20Clamping Type Code (MTP)Screw clamping through holeConnection diameter - inch (DCON MS)1Connection diameter - millimeter (DCON MS)25.4Coolant supply property (CSP)1Cutting diameter - inch (DC)1Cutting diameter - millimeter (DC)25.4Cutting diameter maximum - inch (DCX)1.386Cutting diameter maximum - millimeter (DCX)35.2Hand (Cutting direction)RightOverall length - inch (OAL)3.819Overall length - millimeter (OAL)97Peripheral effective cutting edge count (ZEFP)3Radial rake angle (GAMF)-5Rotational speed maximum (RPMX)22000ShankWeldon shank DIN 1835BUsable Length - inch (LU)1.28
Specifications
| Axial rake angle (GAMP) | 20 |
| Clamping Type Code (MTP) | Screw clamping through hole |
| Connection diameter - inch (DCON MS) | 1 |
| Connection diameter - millimeter (DCON MS) | 25.4 |
| Coolant supply property (CSP) | 1 |
| Cutting diameter - inch (DC) | 1 |
| Cutting diameter - millimeter (DC) | 25.4 |
| Cutting diameter maximum - inch (DCX) | 1.386 |
| Cutting diameter maximum - millimeter (DCX) | 35.2 |
| Hand (Cutting direction) | Right |
| Overall length - inch (OAL) | 3.819 |
| Overall length - millimeter (OAL) | 97 |
| Peripheral effective cutting edge count (ZEFP) | 3 |
| Radial rake angle (GAMF) | -5 |
| Rotational speed maximum (RPMX) | 22000 |
| Shank | Weldon shank DIN 1835B |
| Usable Length - inch (LU) | 1.28 |
6789713
