Dormer E0719/16NO6 5974227 Hand Tap Straight Flute UNF 9/16 inch x 18
- Write a review
$69.48
Basic StandardANSIClamping width - fractional inch (WSC)0.429Clamping width - inch0.322CoatingBrightCoating property (CTP)4Connection diameter - inch (DCON MS)3.19/32Connection diameter - millimeter (DCON MS)10.9EDP number349816Flute count (NOF)12.9Flute Geometry (FDC)Straight Flute GeometryHand (Cutting direction)RightMaterialHSSMaterial applicationN - Non-ferrous metals, P - Steel and cast steelMID number5974227Ordering code ANSIE0719/16NO6Overall length - fractional inch (OAL)3.19/32Overall length - inch (OAL)3.5938Overall length - millimeter (OAL)91.28Premachined hole diameter - inch (PHD)0.5079Premachined hole diameter - millimeter (PHD)33/64ShankCylindrical shank with SquareThread diameter size (TDZ)9/16Thread form (THFT)UNF - Unified FineThreading length - inch (THL)0.9843Threads per inch (TPI)18Tolerance limitH3Usable length (ULDR)1.5
Specifications
| Basic Standard | ANSI |
| Clamping width - fractional inch (WSC) | 0.429 |
| Clamping width - inch | 0.322 |
| Coating | Bright |
| Coating property (CTP) | 4 |
| Connection diameter - inch (DCON MS) | 3.19/32 |
| Connection diameter - millimeter (DCON MS) | 10.9 |
| EDP number | 349816 |
| Flute count (NOF) | 12.9 |
| Flute Geometry (FDC) | Straight Flute Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS |
| Material application | N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 5974227 |
| Ordering code ANSI | E0719/16NO6 |
| Overall length - fractional inch (OAL) | 3.19/32 |
| Overall length - inch (OAL) | 3.5938 |
| Overall length - millimeter (OAL) | 91.28 |
| Premachined hole diameter - inch (PHD) | 0.5079 |
| Premachined hole diameter - millimeter (PHD) | 33/64 |
| Shank | Cylindrical shank with Square |
| Thread diameter size (TDZ) | 9/16 |
| Thread form (THFT) | UNF - Unified Fine |
| Threading length - inch (THL) | 0.9843 |
| Threads per inch (TPI) | 18 |
| Tolerance limit | H3 |
| Usable length (ULDR) | 1.5 |
5974227
