Dormer S2079/16X1.1/4 7648519 End Mill 9/16 inch
- Write a review
$111.11
Basic StandardDORMERCoatingZrNCoating property (CTP)0Connection diameter - fractional inch (DCON MS)9/16Connection diameter - inch (DCON MS)0.5625Connection diameter - millimeter (DCON MS)14.29Cut lengthMediumCutting diameter - fractional inch (DC)9/16Cutting diameter - inch (DC)0.5625Cutting diameter - millimeter (DC)14.29Cutting diameter tolerance class (TCDC)ANSI +.000/-.002Depth of cut maximum - fractional inch (APMX)1.1/4EDP number7648519Flute count (NOF)2Flute helix angle (FHA)37MaterialHMMaterial applicationN - Non-ferrous metalsMID number7648519Mill ProfileW - Non-ferrous Cutter Type for Soft Malleable MaterialsOrdering code ANSIS2079/16X1.1/4Overall length - fractional inch (OAL)3"Overall length - inch (OAL)3Overall length - millimeter (OAL)76.2Radial rake angle (GAMF)8ShankCylindrical shank
Specifications
| Basic Standard | DORMER |
| Coating | ZrN |
| Coating property (CTP) | 0 |
| Connection diameter - fractional inch (DCON MS) | 9/16 |
| Connection diameter - inch (DCON MS) | 0.5625 |
| Connection diameter - millimeter (DCON MS) | 14.29 |
| Cut length | Medium |
| Cutting diameter - fractional inch (DC) | 9/16 |
| Cutting diameter - inch (DC) | 0.5625 |
| Cutting diameter - millimeter (DC) | 14.29 |
| Cutting diameter tolerance class (TCDC) | ANSI +.000/-.002 |
| Depth of cut maximum - fractional inch (APMX) | 1.1/4 |
| EDP number | 7648519 |
| Flute count (NOF) | 2 |
| Flute helix angle (FHA) | 37 |
| Material | HM |
| Material application | N - Non-ferrous metals |
| MID number | 7648519 |
| Mill Profile | W - Non-ferrous Cutter Type for Soft Malleable Materials |
| Ordering code ANSI | S2079/16X1.1/4 |
| Overall length - fractional inch (OAL) | 3" |
| Overall length - inch (OAL) | 3 |
| Overall length - millimeter (OAL) | 76.2 |
| Radial rake angle (GAMF) | 8 |
| Shank | Cylindrical shank |
7648519
