Dormer A51017/64 5970415 ADX Jobber Drill DIN 338 17/64 inch
- Write a review
$27.21
ApplicationAngleIcon_DICT_SELDrill point 130°Basic StandardDIN 338CoatingTiNCoating processPVDCoating property (CTP)1Connection (shank) descriptionCylindrical shankConnection diameter - inch (DCON MS)0.2657Connection diameter - millimeter (DCON MS)6.75Cutting diameter - fractional inch (DC)17/64Cutting diameter - inch (DC)0.2656Cutting diameter - millimeter (DC)6.75Cutting diameter tolerance class (TCDC)h8Drill LengthJobberEDP number169063Hand (Cutting direction)RightLength chip flute - inch (LCF)2.7165Length chip flute - millimeter (LCF)69MaterialHSSMaterial applicationK - Cast iron, M - Stainless steel, N - Non-ferrous metals, P - Steel and cast steelMID number5970415Ordering code ANSIA51017/64Overall length - inch (OAL)4.2913Overall length - millimeter (OAL)109Point Angle (SIG)130Spiral formQuick Spiral Flute Design 32°- 40°Usable length (ULDR)4
Specifications
| ApplicationAngleIcon_DICT_SEL | Drill point 130° |
| Basic Standard | DIN 338 |
| Coating | TiN |
| Coating process | PVD |
| Coating property (CTP) | 1 |
| Connection (shank) description | Cylindrical shank |
| Connection diameter - inch (DCON MS) | 0.2657 |
| Connection diameter - millimeter (DCON MS) | 6.75 |
| Cutting diameter - fractional inch (DC) | 17/64 |
| Cutting diameter - inch (DC) | 0.2656 |
| Cutting diameter - millimeter (DC) | 6.75 |
| Cutting diameter tolerance class (TCDC) | h8 |
| Drill Length | Jobber |
| EDP number | 169063 |
| Hand (Cutting direction) | Right |
| Length chip flute - inch (LCF) | 2.7165 |
| Length chip flute - millimeter (LCF) | 69 |
| Material | HSS |
| Material application | K - Cast iron, M - Stainless steel, N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 5970415 |
| Ordering code ANSI | A51017/64 |
| Overall length - inch (OAL) | 4.2913 |
| Overall length - millimeter (OAL) | 109 |
| Point Angle (SIG) | 130 |
| Spiral form | Quick Spiral Flute Design 32°- 40° |
| Usable length (ULDR) | 4 |
5970415
