Dormer EP3110-32 5973889 UNF Machine Tap Spiral Point 3FL No.10 x 32
- Write a review
$35.65
Basic StandardDIN 2184-1Clamping Length - millimeter (LSC)8Clamping width - fractional inch (WSC)4.9Clamping width - inch0.1929CoatingSteam TemperedConnection diameter - inch (DCON MS)6Coolant supply property (CSP)4.826EDP number138489Flute count (NOF)3Flute Geometry (FDC)Spiral Point GeometryHand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationP - Steel and cast steelMID number5973889Ordering code ANSIEP3110-32Overall length - inch (OAL)2.7559Overall length - millimeter (OAL)70Premachined hole diameter - inch (PHD)0.1614Premachined hole diameter - millimeter (PHD)4.1ShankCylindrical shank with SquareTap chamfer style (TCS)C 2 - 3Thread diameter - inch (TD)0.19Thread diameter - millimeter (TD)4.826Thread diameter size (TDZ)10Thread form (THFT)UNF - Unified FineThreading length - inch (THL)0.5118Threading length - millimeter (THL)13Threads per inch (TPI)32Tolerance limitH3Usable length (ULDR)2.5Usable Length - inch (LU)0.9843Usable Length - millimeter (LU)25
Specifications
| Basic Standard | DIN 2184-1 |
| Clamping Length - millimeter (LSC) | 8 |
| Clamping width - fractional inch (WSC) | 4.9 |
| Clamping width - inch | 0.1929 |
| Coating | Steam Tempered |
| Connection diameter - inch (DCON MS) | 6 |
| Coolant supply property (CSP) | 4.826 |
| EDP number | 138489 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Spiral Point Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | P - Steel and cast steel |
| MID number | 5973889 |
| Ordering code ANSI | EP3110-32 |
| Overall length - inch (OAL) | 2.7559 |
| Overall length - millimeter (OAL) | 70 |
| Premachined hole diameter - inch (PHD) | 0.1614 |
| Premachined hole diameter - millimeter (PHD) | 4.1 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | C 2 - 3 |
| Thread diameter - inch (TD) | 0.19 |
| Thread diameter - millimeter (TD) | 4.826 |
| Thread diameter size (TDZ) | 10 |
| Thread form (THFT) | UNF - Unified Fine |
| Threading length - inch (THL) | 0.5118 |
| Threading length - millimeter (THL) | 13 |
| Threads per inch (TPI) | 32 |
| Tolerance limit | H3 |
| Usable length (ULDR) | 2.5 |
| Usable Length - inch (LU) | 0.9843 |
| Usable Length - millimeter (LU) | 25 |
5973889
