Dormer S1099.0 7648567 End Mill 9.00 mm
- Write a review
$36.11
Basic StandardDORMERCoatingBrightConnection diameter - inch (DCON MS)0.3937Connection diameter - millimeter (DCON MS)10Cut lengthMediumCutting diameter - inch (DC)0.3543Cutting diameter - millimeter (DC)9Cutting diameter tolerance class (TCDC)ANSI +.000/-.002Depth of cut maximum - inch (APMX)0.8661Depth of cut maximum - millimeter (APMX)22EDP number7648567Flute count (NOF)2Flute helix angle (FHA)30MaterialHMMaterial applicationK - Cast iron, N - Non-ferrous metals, P - Steel and cast steelMID number7648567Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsOrdering code ANSIS1099.0Overall length - inch (OAL)2.7559Overall length - millimeter (OAL)70Peripheral effective cutting edge count (ZEFP)2Radial rake angle (GAMF)10ShankCylindrical shank
Specifications
| Basic Standard | DORMER |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 0.3937 |
| Connection diameter - millimeter (DCON MS) | 10 |
| Cut length | Medium |
| Cutting diameter - inch (DC) | 0.3543 |
| Cutting diameter - millimeter (DC) | 9 |
| Cutting diameter tolerance class (TCDC) | ANSI +.000/-.002 |
| Depth of cut maximum - inch (APMX) | 0.8661 |
| Depth of cut maximum - millimeter (APMX) | 22 |
| EDP number | 7648567 |
| Flute count (NOF) | 2 |
| Flute helix angle (FHA) | 30 |
| Material | HM |
| Material application | K - Cast iron, N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 7648567 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Ordering code ANSI | S1099.0 |
| Overall length - inch (OAL) | 2.7559 |
| Overall length - millimeter (OAL) | 70 |
| Peripheral effective cutting edge count (ZEFP) | 2 |
| Radial rake angle (GAMF) | 10 |
| Shank | Cylindrical shank |
7648567
