15867/16X143FLNO3 1010363 UNC Machine Tap 7/16 inch x 14
- Write a review
$20.81
Basic StandardANSIClamping width - inch0.242CoatingBrightConnection diameter - inch (DCON MS)0.323Connection diameter - millimeter (DCON MS)8.2Flute count (NOF)3Flute Geometry (FDC)Spiral Flute GeometryFlute helix angle (FHA)30Hand (Cutting direction)RightMaterialHSSOverall length - millimeter (OAL)0.323Overall length - fractional inch (OAL)3.5/32Overall length - inch (OAL)3.1563Premachined hole diameter - millimeter (PHD)30ShankCylindrical shank with SquareThread diameter size (TDZ)7/16Thread form (THFT)UNC - Unified CoarseThreading length - fractional inch (THL)1.7/16Threads per inch (TPI)14Tolerance limitH3Usable length (ULDR)2.5
Specifications
| Basic Standard | ANSI |
| Clamping width - inch | 0.242 |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 0.323 |
| Connection diameter - millimeter (DCON MS) | 8.2 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Spiral Flute Geometry |
| Flute helix angle (FHA) | 30 |
| Hand (Cutting direction) | Right |
| Material | HSS |
| Overall length - millimeter (OAL) | 0.323 |
| Overall length - fractional inch (OAL) | 3.5/32 |
| Overall length - inch (OAL) | 3.1563 |
| Premachined hole diameter - millimeter (PHD) | 30 |
| Shank | Cylindrical shank with Square |
| Thread diameter size (TDZ) | 7/16 |
| Thread form (THFT) | UNC - Unified Coarse |
| Threading length - fractional inch (THL) | 1.7/16 |
| Threads per inch (TPI) | 14 |
| Tolerance limit | H3 |
| Usable length (ULDR) | 2.5 |
15867/16X143FLNO3
