Dormer E628M20 7350383 Machine Tap Blue Shark for Stainless Steel Spiral Flute 4FL M20 x 2.50 mm
- Write a review
$206.59
Basic StandardDIN/ANSIClamping Length - millimeter (LSC)18Clamping width - inch0.487CoatingSUPER-BCoating property (CTP)1Connection diameter - inch (DCON MS)0.652Connection diameter - millimeter (DCON MS)16.56Coolant supply property (CSP)11/16EDP number7350383Flute count (NOF)4Flute Geometry (FDC)Spiral Flute GeometryFlute helix angle (FHA)40Hand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationM - Stainless steelMID number7350383Ordering code ANSIE628M20Overall length - inch (OAL)5.5118Overall length - millimeter (OAL)0.652Premachined hole diameter - imperial (PHD)11/16Premachined hole diameter - inch (PHD)0.689Premachined hole diameter - millimeter (PHD)40ShankCylindrical shank with SquareTap chamfer style (TCS)C 2 - 3Thread diameter - millimeter (TD)17.5Thread diameter size (TDZ)20Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.0984Thread pitch - millimeter (TP)2.5Threading length - inch (THL)0.9843Threading length - millimeter (THL)25Tolerance limitD7Usable length (ULDR)2.5
Specifications
| Basic Standard | DIN/ANSI |
| Clamping Length - millimeter (LSC) | 18 |
| Clamping width - inch | 0.487 |
| Coating | SUPER-B |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.652 |
| Connection diameter - millimeter (DCON MS) | 16.56 |
| Coolant supply property (CSP) | 11/16 |
| EDP number | 7350383 |
| Flute count (NOF) | 4 |
| Flute Geometry (FDC) | Spiral Flute Geometry |
| Flute helix angle (FHA) | 40 |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | M - Stainless steel |
| MID number | 7350383 |
| Ordering code ANSI | E628M20 |
| Overall length - inch (OAL) | 5.5118 |
| Overall length - millimeter (OAL) | 0.652 |
| Premachined hole diameter - imperial (PHD) | 11/16 |
| Premachined hole diameter - inch (PHD) | 0.689 |
| Premachined hole diameter - millimeter (PHD) | 40 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | C 2 - 3 |
| Thread diameter - millimeter (TD) | 17.5 |
| Thread diameter size (TDZ) | 20 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.0984 |
| Thread pitch - millimeter (TP) | 2.5 |
| Threading length - inch (THL) | 0.9843 |
| Threading length - millimeter (THL) | 25 |
| Tolerance limit | D7 |
| Usable length (ULDR) | 2.5 |
7350383