S2091/2 023032 Taper Shank Drill 1/2 inch
- Write a review
$53.95
ApplicationAngleIcon_DICT_SELDrill point 118°Basic StandardANSICoatingSteam TemperedConnection (shank) descriptionMorse Taper ShankConnection size code machine side (CZC MS)1Cutting diameter - fractional inch (DC)1/2Cutting diameter - inch (DC)0.5Cutting diameter - millimeter (DC)12.7Drill LengthJobberHand (Cutting direction)RightLength chip flute - fractional inch (LCF)4.3/8Length chip flute - inch (LCF)4.375MaterialHSSOverall length - fractional inch (OAL)7.3/4Overall length - millimeter (OAL)196.85Point Angle (SIG)118Spiral formStandard SpiralSurface treatementSteam TemperedUsable length (ULDR)4
Specifications
| ApplicationAngleIcon_DICT_SEL | Drill point 118° |
| Basic Standard | ANSI |
| Coating | Steam Tempered |
| Connection (shank) description | Morse Taper Shank |
| Connection size code machine side (CZC MS) | 1 |
| Cutting diameter - fractional inch (DC) | 1/2 |
| Cutting diameter - inch (DC) | 0.5 |
| Cutting diameter - millimeter (DC) | 12.7 |
| Drill Length | Jobber |
| Hand (Cutting direction) | Right |
| Length chip flute - fractional inch (LCF) | 4.3/8 |
| Length chip flute - inch (LCF) | 4.375 |
| Material | HSS |
| Overall length - fractional inch (OAL) | 7.3/4 |
| Overall length - millimeter (OAL) | 196.85 |
| Point Angle (SIG) | 118 |
| Spiral form | Standard Spiral |
| Surface treatement | Steam Tempered |
| Usable length (ULDR) | 4 |
S2091/2
