Dormer C11030.0 5983906 Slot Drill 30.00 mm
- Write a review
$147.92
Basic StandardDIN 327 DCoatingBrightConnection diameter - inch (DCON MS)0.9843Connection diameter - millimeter (DCON MS)25Connection diameter tolerance machine side (TCDCONMS)h6Cut lengthExtra shortCutting diameter - inch (DC)1.1811Cutting diameter - millimeter (DC)30Cutting diameter tolerance class (TCDC)e8Depth of cut maximum - inch (APMX)1.0236Depth of cut maximum - millimeter (APMX)26EDP number353400Flute count (NOF)2Flute helix angle (FHA)30MaterialHSS-E-PMMaterial applicationN - Non-ferrous metals, P - Steel and cast steel, S - High-temperature alloysMID number5983906Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsNeck diameter - inch (DN)0.9646Neck diameter - millimeter (DN)24.5Ordering code ANSIC11030.0Overall length - inch (OAL)4.0157Overall length - millimeter (OAL)102Peripheral effective cutting edge count (ZEFP)2Radial rake angle (GAMF)12ShankWeldon shank DIN 1835BUsable Length - millimeter (LU)45.5
Specifications
| Basic Standard | DIN 327 D |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 0.9843 |
| Connection diameter - millimeter (DCON MS) | 25 |
| Connection diameter tolerance machine side (TCDCONMS) | h6 |
| Cut length | Extra short |
| Cutting diameter - inch (DC) | 1.1811 |
| Cutting diameter - millimeter (DC) | 30 |
| Cutting diameter tolerance class (TCDC) | e8 |
| Depth of cut maximum - inch (APMX) | 1.0236 |
| Depth of cut maximum - millimeter (APMX) | 26 |
| EDP number | 353400 |
| Flute count (NOF) | 2 |
| Flute helix angle (FHA) | 30 |
| Material | HSS-E-PM |
| Material application | N - Non-ferrous metals, P - Steel and cast steel, S - High-temperature alloys |
| MID number | 5983906 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Neck diameter - inch (DN) | 0.9646 |
| Neck diameter - millimeter (DN) | 24.5 |
| Ordering code ANSI | C11030.0 |
| Overall length - inch (OAL) | 4.0157 |
| Overall length - millimeter (OAL) | 102 |
| Peripheral effective cutting edge count (ZEFP) | 2 |
| Radial rake angle (GAMF) | 12 |
| Shank | Weldon shank DIN 1835B |
| Usable Length - millimeter (LU) | 45.5 |
5983906
