15483/8X18 1010928 NPT Pipe Tap 4FL 3/8 inch x 18
- Write a review
$42.47
Basic StandardANSIClamping width - inch0.531CoatingBrightConnection diameter - inch (DCON MS)0.7Connection diameter - millimeter (DCON MS)17.78Flute count (NOF)4Flute Geometry (FDC)Spiral Flute GeometryFlute helix angle (FHA)30Hand (Cutting direction)RightMaterialHSSOverall length - millimeter (OAL)0.7Overall length - fractional inch (OAL)2.9/16Overall length - inch (OAL)2.5625Premachined hole diameter - millimeter (PHD)30ShankCylindrical shank with SquareThread diameter size (TDZ)3/8Thread form (THFT)NPT - National taper pipeThreading length - fractional inch (THL)1.1/16Threads per inch (TPI)18Usable length (ULDR)2
Specifications
| Basic Standard | ANSI |
| Clamping width - inch | 0.531 |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 0.7 |
| Connection diameter - millimeter (DCON MS) | 17.78 |
| Flute count (NOF) | 4 |
| Flute Geometry (FDC) | Spiral Flute Geometry |
| Flute helix angle (FHA) | 30 |
| Hand (Cutting direction) | Right |
| Material | HSS |
| Overall length - millimeter (OAL) | 0.7 |
| Overall length - fractional inch (OAL) | 2.9/16 |
| Overall length - inch (OAL) | 2.5625 |
| Premachined hole diameter - millimeter (PHD) | 30 |
| Shank | Cylindrical shank with Square |
| Thread diameter size (TDZ) | 3/8 |
| Thread form (THFT) | NPT - National taper pipe |
| Threading length - fractional inch (THL) | 1.1/16 |
| Threads per inch (TPI) | 18 |
| Usable length (ULDR) | 2 |
15483/8X18
