Dormer E500M30NO3 5976741 Machine Tap Straight Flute 4FL M30 x 3.50 mm
- Write a review
$283.33
Basic StandardISO 529Clamping Length - millimeter (LSC)20Clamping width - fractional inch (WSC)16Clamping width - inch0.6299CoatingBrightConnection diameter - inch (DCON MS)0.7874Connection diameter - millimeter (DCON MS)20EDP number94495Flute count (NOF)4Flute Geometry (FDC)Straight Flute GeometryHand (Cutting direction)RightMaterialHSSMaterial applicationP - Steel and cast steelMID number5976741Ordering code ANSIE500M30NO3Overall length - inch (OAL)5.4331Overall length - millimeter (OAL)138Premachined hole diameter - inch (PHD)1.0433Premachined hole diameter - millimeter (PHD)26.5ShankCylindrical shank with SquareThread diameter size (TDZ)30Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.1378Thread pitch - millimeter (TP)3.5Threading length - inch (THL)1.6142Threading length - millimeter (THL)41Usable length (ULDR)1.5
Specifications
| Basic Standard | ISO 529 |
| Clamping Length - millimeter (LSC) | 20 |
| Clamping width - fractional inch (WSC) | 16 |
| Clamping width - inch | 0.6299 |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 0.7874 |
| Connection diameter - millimeter (DCON MS) | 20 |
| EDP number | 94495 |
| Flute count (NOF) | 4 |
| Flute Geometry (FDC) | Straight Flute Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS |
| Material application | P - Steel and cast steel |
| MID number | 5976741 |
| Ordering code ANSI | E500M30NO3 |
| Overall length - inch (OAL) | 5.4331 |
| Overall length - millimeter (OAL) | 138 |
| Premachined hole diameter - inch (PHD) | 1.0433 |
| Premachined hole diameter - millimeter (PHD) | 26.5 |
| Shank | Cylindrical shank with Square |
| Thread diameter size (TDZ) | 30 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.1378 |
| Thread pitch - millimeter (TP) | 3.5 |
| Threading length - inch (THL) | 1.6142 |
| Threading length - millimeter (THL) | 41 |
| Usable length (ULDR) | 1.5 |
5976741
