Dormer J23512.0-11 6821340 UNC Thread Mill Spiral Flute 10° Oil Feed 5/8 inch x 11
- Write a review
$417.46
Basic StandardDORMERCoatingAlcrona ProCoating property (CTP)1Connection diameter - inch (DCON MS)0.4724Connection diameter - millimeter (DCON MS)12Coolant exit style (CXSC)axial concentric exitCoolant supply property (CSP)1Cutting diameter - inch (DC)0.4724Cutting diameter - millimeter (DC)12Depth of cut maximum - inch (APMX)1.0236Depth of cut maximum - millimeter (APMX)26EDP number46821340Flute count (NOF)4Flute Geometry (FDC)Spiral Flute GeometryFlute helix angle (FHA)10Hand (Cutting direction)RightMaterialHMMID number6821340Ordering code ANSIJ23512.0-11Overall length - inch (OAL)3.2677Overall length - millimeter (OAL)83ShankCylindrical shank DIN 6535 HBThread diameter size (TDZ)5/8Thread form (THFT)UNC - Unified CoarseThreads per inch (TPI)11Usable length (ULDR)2
Specifications
| Basic Standard | DORMER |
| Coating | Alcrona Pro |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.4724 |
| Connection diameter - millimeter (DCON MS) | 12 |
| Coolant exit style (CXSC) | axial concentric exit |
| Coolant supply property (CSP) | 1 |
| Cutting diameter - inch (DC) | 0.4724 |
| Cutting diameter - millimeter (DC) | 12 |
| Depth of cut maximum - inch (APMX) | 1.0236 |
| Depth of cut maximum - millimeter (APMX) | 26 |
| EDP number | 46821340 |
| Flute count (NOF) | 4 |
| Flute Geometry (FDC) | Spiral Flute Geometry |
| Flute helix angle (FHA) | 10 |
| Hand (Cutting direction) | Right |
| Material | HM |
| MID number | 6821340 |
| Ordering code ANSI | J23512.0-11 |
| Overall length - inch (OAL) | 3.2677 |
| Overall length - millimeter (OAL) | 83 |
| Shank | Cylindrical shank DIN 6535 HB |
| Thread diameter size (TDZ) | 5/8 |
| Thread form (THFT) | UNC - Unified Coarse |
| Threads per inch (TPI) | 11 |
| Usable length (ULDR) | 2 |
6821340