Dormer E0355/163FL 5974740 UNF Machine Tap Spiral Point 5/16 inch x 24
- Write a review
$12.09
Basic StandardANSIClamping width - inch0.238CoatingBrightConnection diameter - inch (DCON MS)0.318Connection diameter - millimeter (DCON MS)8.08EDP number582022Flute count (NOF)3Flute Geometry (FDC)Spiral Point GeometryHand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationN - Non-ferrous metals, P - Steel and cast steelMID number5974740Ordering code ANSIE0355/163FLOverall length - fractional inch (OAL)2.23/32Overall length - inch (OAL)2.7188Overall length - millimeter (OAL)0.318Premachined hole diameter - imperial (PHD)IPremachined hole diameter - inch (PHD)0.2717Premachined hole diameter - millimeter (PHD)6.9ShankCylindrical shank with SquareTap chamfer style (TCS)B 3.5 - 5Thread diameter - millimeter (TD)IThread diameter size (TDZ)5/16Thread form (THFT)UNF - Unified FineThreading length - inch (THL)0.5939Threads per inch (TPI)24Tolerance limitH3Usable length (ULDR)2.5Usable Length - inch (LU)1.1891
Specifications
| Basic Standard | ANSI |
| Clamping width - inch | 0.238 |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 0.318 |
| Connection diameter - millimeter (DCON MS) | 8.08 |
| EDP number | 582022 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Spiral Point Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 5974740 |
| Ordering code ANSI | E0355/163FL |
| Overall length - fractional inch (OAL) | 2.23/32 |
| Overall length - inch (OAL) | 2.7188 |
| Overall length - millimeter (OAL) | 0.318 |
| Premachined hole diameter - imperial (PHD) | I |
| Premachined hole diameter - inch (PHD) | 0.2717 |
| Premachined hole diameter - millimeter (PHD) | 6.9 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | B 3.5 - 5 |
| Thread diameter - millimeter (TD) | I |
| Thread diameter size (TDZ) | 5/16 |
| Thread form (THFT) | UNF - Unified Fine |
| Threading length - inch (THL) | 0.5939 |
| Threads per inch (TPI) | 24 |
| Tolerance limit | H3 |
| Usable length (ULDR) | 2.5 |
| Usable Length - inch (LU) | 1.1891 |
5974740
