ATA 90036 High Performance Universal Turning Insert ANSI Code: SCMT32.52-AG-AT201 SCMT Insert Material Grade: H K M N P S 32.52
- Write a review
$8.05
ANSI CodeSCMT32.52-AG-AT201ChipbreakerAGCorner Radius0.8 mmFinishPVD CoatedFor Use OnMild Steel, Stainless Steel, Carbon Steel (Hard Steel) and Cast IronInscribed Circle9.53 mmInsert Size32.52Insert StyleSCMTISO CodeSCMT09T308-AG-AT201Length9.53 mmManufacturer's GradeAT201MaterialCarbideMaterial GradeH, K, M, N, P, SMaximum Depth of Cut3 mmRelief Angle7 degShapeSquaredThickness3.97 mmTypeHigh Performance UniversalWidth9.53 mm
Specifications
| Auxiliary lip | No |
| Design | CRWH1 |
| Housing bore diameter | 279.4 mm, 11.0 in |
| Maximum operating temperature | 100.0 °C, 212.0 °F |
| Maximum operating temperature (°F) | 100.0 °C, 212.0 |
| Minimum operating temperature | -40.0 °C, -40.0 °F |
| Minimum operating temperature (°F) | -40.0 °C, -40.0 |
| Permissible circumferential speed | 12.0 m/s |
| Rotational speed | 1020.0 r/min |
| Seal width | 15.88 mm, 0.625 in |
| Sealing lip material | Nitrile rubber (NBR) |
| Shaft diameter | 228.6 mm, 9.0 in |
| Type of outside diameter | Metal-cased |
| Unit system | Inch |
90036
