Pramet ADMX 160608SR-MM:M9340 7051468 Milling Insert - Square Shoulder
- Write a review
$18.02
Coating0.007Coating process0.006Coating property (CTP)1Cooling effectMMCorner radius - inch (RE)M9340Corner radius - millimeter (RE)MT-CVDCutting edge length - inch (L)0.63Cutting edge length - millimeter (L)16Depth of cut maximum - inch (APMX)0.512Depth of cut maximum - millimeter (APMX)13Feed maximal - millimeter0.19Feed minimal - millimeter0.14Feed_MAX_IMP_NUM0.012Feed_MIN_IMP_NUM0.3Fixing hole diameter - inch (D1)0.177Fixing hole diameter - millimeter (D1)4.5Insert cutting diameter - millimeter (CDI)6.25Insert diameter - inch (INSD)0.392Insert diameter - millimeter (INSD)9.95Insert shape code (SC)A - parallelogram 85° included angleInsert thickness - inch (S)0.8Insert thickness - millimeter (S)6.25Insert width - inch (W1)0.392Insert width - millimeter (W1)9.95Major cutting edge angle (KRINS)0.031Wiper edge length - inch (BS)Very negative effect on tool life - cooling is not recommended
Specifications
| Coating | 0.007 |
| Coating process | 0.006 |
| Coating property (CTP) | 1 |
| Cooling effect | MM |
| Corner radius - inch (RE) | M9340 |
| Corner radius - millimeter (RE) | MT-CVD |
| Cutting edge length - inch (L) | 0.63 |
| Cutting edge length - millimeter (L) | 16 |
| Depth of cut maximum - inch (APMX) | 0.512 |
| Depth of cut maximum - millimeter (APMX) | 13 |
| Feed maximal - millimeter | 0.19 |
| Feed minimal - millimeter | 0.14 |
| Feed_MAX_IMP_NUM | 0.012 |
| Feed_MIN_IMP_NUM | 0.3 |
| Fixing hole diameter - inch (D1) | 0.177 |
| Fixing hole diameter - millimeter (D1) | 4.5 |
| Insert cutting diameter - millimeter (CDI) | 6.25 |
| Insert diameter - inch (INSD) | 0.392 |
| Insert diameter - millimeter (INSD) | 9.95 |
| Insert shape code (SC) | A - parallelogram 85° included angle |
| Insert thickness - inch (S) | 0.8 |
| Insert thickness - millimeter (S) | 6.25 |
| Insert width - inch (W1) | 0.392 |
| Insert width - millimeter (W1) | 9.95 |
| Major cutting edge angle (KRINS) | 0.031 |
| Wiper edge length - inch (BS) | Very negative effect on tool life - cooling is not recommended |
7051468
