Dormer C35320.0 5983994 Slot Drill 20.00 mm
- Write a review
$121.68
Basic StandardDIN 327 DCoatingALCRONACoating property (CTP)1Connection diameter - inch (DCON MS)0.7874Connection diameter - millimeter (DCON MS)20Connection diameter tolerance machine side (TCDCONMS)h6Cut lengthExtra shortCutting diameter - inch (DC)0.7874Cutting diameter - millimeter (DC)20Cutting diameter tolerance class (TCDC)e8Depth of cut maximum - inch (APMX)0.8661Depth of cut maximum - millimeter (APMX)22EDP number573198Flute count (NOF)3Flute helix angle (FHA)30MaterialHSS-E-PMMaterial applicationK - Cast iron, N - Non-ferrous metals, P - Steel and cast steel, S - High-temperature alloysMID number5983994Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsNeck diameter - inch (DN)0.7677Neck diameter - millimeter (DN)19.5Ordering code ANSIC35320.0Overall length - inch (OAL)3.4646Overall length - millimeter (OAL)88Peripheral effective cutting edge count (ZEFP)3Radial rake angle (GAMF)12ShankWeldon shank DIN 1835BUsable Length - millimeter (LU)37.5
Specifications
| Basic Standard | DIN 327 D |
| Coating | ALCRONA |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.7874 |
| Connection diameter - millimeter (DCON MS) | 20 |
| Connection diameter tolerance machine side (TCDCONMS) | h6 |
| Cut length | Extra short |
| Cutting diameter - inch (DC) | 0.7874 |
| Cutting diameter - millimeter (DC) | 20 |
| Cutting diameter tolerance class (TCDC) | e8 |
| Depth of cut maximum - inch (APMX) | 0.8661 |
| Depth of cut maximum - millimeter (APMX) | 22 |
| EDP number | 573198 |
| Flute count (NOF) | 3 |
| Flute helix angle (FHA) | 30 |
| Material | HSS-E-PM |
| Material application | K - Cast iron, N - Non-ferrous metals, P - Steel and cast steel, S - High-temperature alloys |
| MID number | 5983994 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Neck diameter - inch (DN) | 0.7677 |
| Neck diameter - millimeter (DN) | 19.5 |
| Ordering code ANSI | C35320.0 |
| Overall length - inch (OAL) | 3.4646 |
| Overall length - millimeter (OAL) | 88 |
| Peripheral effective cutting edge count (ZEFP) | 3 |
| Radial rake angle (GAMF) | 12 |
| Shank | Weldon shank DIN 1835B |
| Usable Length - millimeter (LU) | 37.5 |
5983994
