Pramet SEET 1204AFFN-FA:M0315 6756272 Milling Insert - Face
- Write a review
$28.38
ChipbreakerFACoatingM0315Coating processPVDCoating property (CTP)1Cooling effectPositive effect on tool life - cooling is recommendedCutting edge length - inch (L)0.5Cutting edge length - millimeter (L)12.7Depth of cut maximum - inch (APMX)0.177Depth of cut maximum - millimeter (APMX)4.5Depth of cut minimum - inch (APMN)0.008Depth of cut minimum - millimeter (APMN)0.2Feed maximal - millimeter0.4Feed minimal - millimeter0.05Feed_MAX_IMP_NUM0.016Feed_MIN_IMP_NUM0.002Fixing hole diameter - inch (D1)0.217Fixing hole diameter - millimeter (D1)5.5Inscribed circle diameter - inch (IC)0.5Inscribed circle diameter - millimeter (IC)12.7Insert thickness - inch (S)0.187Insert thickness - millimeter (S)4.76m-dimension - inch (M)0.063m-dimension - millimeter (M)1.6
Specifications
| Chipbreaker | FA |
| Coating | M0315 |
| Coating process | PVD |
| Coating property (CTP) | 1 |
| Cooling effect | Positive effect on tool life - cooling is recommended |
| Cutting edge length - inch (L) | 0.5 |
| Cutting edge length - millimeter (L) | 12.7 |
| Depth of cut maximum - inch (APMX) | 0.177 |
| Depth of cut maximum - millimeter (APMX) | 4.5 |
| Depth of cut minimum - inch (APMN) | 0.008 |
| Depth of cut minimum - millimeter (APMN) | 0.2 |
| Feed maximal - millimeter | 0.4 |
| Feed minimal - millimeter | 0.05 |
| Feed_MAX_IMP_NUM | 0.016 |
| Feed_MIN_IMP_NUM | 0.002 |
| Fixing hole diameter - inch (D1) | 0.217 |
| Fixing hole diameter - millimeter (D1) | 5.5 |
| Inscribed circle diameter - inch (IC) | 0.5 |
| Inscribed circle diameter - millimeter (IC) | 12.7 |
| Insert thickness - inch (S) | 0.187 |
| Insert thickness - millimeter (S) | 4.76 |
| m-dimension - inch (M) | 0.063 |
| m-dimension - millimeter (M) | 1.6 |
SEET 1204AFFN-FA:M0315
