Dormer E292M8 6305737 M Machine Forming Tap DIN 2174 5FL M8 x 1.25 mm
- Write a review
$49.44
Basic StandardDIN 2174Clamping Length - millimeter (LSC)9Clamping width - inch0.2441Clamping width - millimeter (WSC)6.2CoatingTiNCoating property (CTP)1Connection diameter - inch (DCON MS)0.315Connection diameter - millimeter (DCON MS)8EDP number46305737Flute count (NOF)5Flute Geometry (FDC)Fluteless Geometry (Threadforming)Hand (Cutting direction)RightMaterialHSS-EMaterial applicationM - Stainless steel, N - Non-ferrous metals, P - Steel and cast steelMID number6305737Ordering code ANSIE292M8Overall length - inch (OAL)3.5433Overall length - millimeter (OAL)90Premachined hole diameter - inch (PHD)0.2913Premachined hole diameter - millimeter (PHD)7.4ShankCylindrical shank with SquareTap chamfer style (TCS)C 2 - 3.5Thread diameter size (TDZ)8Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.0492Thread pitch - millimeter (TP)1.25Threading length - inch (THL)0.7087Threading length - millimeter (THL)18Usable length (ULDR)3Usable Length - inch (LU)1.378Usable Length - millimeter (LU)35
Specifications
| Basic Standard | DIN 2174 |
| Clamping Length - millimeter (LSC) | 9 |
| Clamping width - inch | 0.2441 |
| Clamping width - millimeter (WSC) | 6.2 |
| Coating | TiN |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.315 |
| Connection diameter - millimeter (DCON MS) | 8 |
| EDP number | 46305737 |
| Flute count (NOF) | 5 |
| Flute Geometry (FDC) | Fluteless Geometry (Threadforming) |
| Hand (Cutting direction) | Right |
| Material | HSS-E |
| Material application | M - Stainless steel, N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 6305737 |
| Ordering code ANSI | E292M8 |
| Overall length - inch (OAL) | 3.5433 |
| Overall length - millimeter (OAL) | 90 |
| Premachined hole diameter - inch (PHD) | 0.2913 |
| Premachined hole diameter - millimeter (PHD) | 7.4 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | C 2 - 3.5 |
| Thread diameter size (TDZ) | 8 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.0492 |
| Thread pitch - millimeter (TP) | 1.25 |
| Threading length - inch (THL) | 0.7087 |
| Threading length - millimeter (THL) | 18 |
| Usable length (ULDR) | 3 |
| Usable Length - inch (LU) | 1.378 |
| Usable Length - millimeter (LU) | 35 |
6305737
