Dormer C12310.0 5984334 Slot Drill 10.00 mm
- Write a review
$36.22
Basic StandardDIN 844 KCoatingBrightConnection diameter - inch (DCON MS)0.3937Connection diameter - millimeter (DCON MS)10Connection diameter tolerance machine side (TCDCONMS)h6Cut lengthShortCutting diameter - inch (DC)0.3937Cutting diameter - millimeter (DC)10Cutting diameter tolerance class (TCDC)e8Depth of cut maximum - inch (APMX)0.8661Depth of cut maximum - millimeter (APMX)22EDP number353561Flute count (NOF)2Flute helix angle (FHA)30MaterialHSS-E-PMMaterial applicationN - Non-ferrous metals, P - Steel and cast steel, S - High-temperature alloysMID number5984334Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsNeck diameter - inch (DN)0.374Neck diameter - millimeter (DN)9.5Ordering code ANSIC12310.0Overall length - inch (OAL)2.8346Overall length - millimeter (OAL)72Peripheral effective cutting edge count (ZEFP)2Radial rake angle (GAMF)12ShankWeldon shank DIN 1835BUsable Length - millimeter (LU)31.5
Specifications
| Basic Standard | DIN 844 K |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 0.3937 |
| Connection diameter - millimeter (DCON MS) | 10 |
| Connection diameter tolerance machine side (TCDCONMS) | h6 |
| Cut length | Short |
| Cutting diameter - inch (DC) | 0.3937 |
| Cutting diameter - millimeter (DC) | 10 |
| Cutting diameter tolerance class (TCDC) | e8 |
| Depth of cut maximum - inch (APMX) | 0.8661 |
| Depth of cut maximum - millimeter (APMX) | 22 |
| EDP number | 353561 |
| Flute count (NOF) | 2 |
| Flute helix angle (FHA) | 30 |
| Material | HSS-E-PM |
| Material application | N - Non-ferrous metals, P - Steel and cast steel, S - High-temperature alloys |
| MID number | 5984334 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Neck diameter - inch (DN) | 0.374 |
| Neck diameter - millimeter (DN) | 9.5 |
| Ordering code ANSI | C12310.0 |
| Overall length - inch (OAL) | 2.8346 |
| Overall length - millimeter (OAL) | 72 |
| Peripheral effective cutting edge count (ZEFP) | 2 |
| Radial rake angle (GAMF) | 12 |
| Shank | Weldon shank DIN 1835B |
| Usable Length - millimeter (LU) | 31.5 |
5984334
