Dormer E0713/4NO6 5974079 Hand Tap Straight Flute UNF 3/4 inch x 16
- Write a review
$124.47
Basic StandardANSIClamping width - fractional inch (WSC)0.59Clamping width - inch0.442CoatingBrightCoating property (CTP)4Connection diameter - inch (DCON MS)4.1/4Connection diameter - millimeter (DCON MS)14.99EDP number351932Flute count (NOF)17.5Flute Geometry (FDC)Straight Flute GeometryHand (Cutting direction)RightMaterialHSSMaterial applicationN - Non-ferrous metals, P - Steel and cast steelMID number5974079Ordering code ANSIE0713/4NO6Overall length - fractional inch (OAL)4.1/4Overall length - inch (OAL)4.25Overall length - millimeter (OAL)107.95Premachined hole diameter - inch (PHD)0.689Premachined hole diameter - millimeter (PHD)11/16ShankCylindrical shank with SquareThread diameter size (TDZ)3/4Thread form (THFT)UNF - Unified FineThreading length - inch (THL)1.1811Threads per inch (TPI)16Tolerance limitH3Usable length (ULDR)1.5
Specifications
| Basic Standard | ANSI |
| Clamping width - fractional inch (WSC) | 0.59 |
| Clamping width - inch | 0.442 |
| Coating | Bright |
| Coating property (CTP) | 4 |
| Connection diameter - inch (DCON MS) | 4.1/4 |
| Connection diameter - millimeter (DCON MS) | 14.99 |
| EDP number | 351932 |
| Flute count (NOF) | 17.5 |
| Flute Geometry (FDC) | Straight Flute Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS |
| Material application | N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 5974079 |
| Ordering code ANSI | E0713/4NO6 |
| Overall length - fractional inch (OAL) | 4.1/4 |
| Overall length - inch (OAL) | 4.25 |
| Overall length - millimeter (OAL) | 107.95 |
| Premachined hole diameter - inch (PHD) | 0.689 |
| Premachined hole diameter - millimeter (PHD) | 11/16 |
| Shank | Cylindrical shank with Square |
| Thread diameter size (TDZ) | 3/4 |
| Thread form (THFT) | UNF - Unified Fine |
| Threading length - inch (THL) | 1.1811 |
| Threads per inch (TPI) | 16 |
| Tolerance limit | H3 |
| Usable length (ULDR) | 1.5 |
5974079
