Dormer S1345/64 7648727 End Mill 4FL 5/64 inch
- Write a review
$13.42
Basic StandardDORMERCoatingBrightConnection diameter - fractional inch (DCON MS)1/8Connection diameter - inch (DCON MS)0.125Connection diameter - millimeter (DCON MS)3.18Cut lengthMediumCutting diameter - fractional inch (DC)5/64Cutting diameter - inch (DC)0.0781Cutting diameter - millimeter (DC)1.98Cutting diameter tolerance class (TCDC)ANSI +.000/-.002Depth of cut maximum - fractional inch (APMX)1/4EDP number7648727Flute count (NOF)4Flute helix angle (FHA)30MaterialHMMaterial applicationK - Cast iron, M - Stainless steel, N - Non-ferrous metals, P - Steel and cast steelMID number7648727Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsOrdering code ANSIS1345/64Overall length - fractional inch (OAL)1.1/2Overall length - inch (OAL)1.5Overall length - millimeter (OAL)38.1Radial rake angle (GAMF)10ShankCylindrical shank
Specifications
| Basic Standard | DORMER |
| Coating | Bright |
| Connection diameter - fractional inch (DCON MS) | 1/8 |
| Connection diameter - inch (DCON MS) | 0.125 |
| Connection diameter - millimeter (DCON MS) | 3.18 |
| Cut length | Medium |
| Cutting diameter - fractional inch (DC) | 5/64 |
| Cutting diameter - inch (DC) | 0.0781 |
| Cutting diameter - millimeter (DC) | 1.98 |
| Cutting diameter tolerance class (TCDC) | ANSI +.000/-.002 |
| Depth of cut maximum - fractional inch (APMX) | 1/4 |
| EDP number | 7648727 |
| Flute count (NOF) | 4 |
| Flute helix angle (FHA) | 30 |
| Material | HM |
| Material application | K - Cast iron, M - Stainless steel, N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 7648727 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Ordering code ANSI | S1345/64 |
| Overall length - fractional inch (OAL) | 1.1/2 |
| Overall length - inch (OAL) | 1.5 |
| Overall length - millimeter (OAL) | 38.1 |
| Radial rake angle (GAMF) | 10 |
| Shank | Cylindrical shank |
7648727
