Dormer S813HA7.0 5983644 Slot Drill N 6527 L 7.00 mm
- Write a review
$65.81
Basic StandardDIN 6527 LCoatingAlCrNCoating property (CTP)1Connection diameter - inch (DCON MS)0.315Connection diameter - millimeter (DCON MS)8Connection diameter tolerance machine side (TCDCONMS)h6Corner chamfer width - millimeter (CHW)0.13Cut lengthShortCutting diameter - inch (DC)0.2756Cutting diameter - millimeter (DC)7Cutting diameter tolerance class (TCDC)h9Depth of cut maximum - inch (APMX)0.5118Depth of cut maximum - millimeter (APMX)13EDP number642245Flute count (NOF)3Flute helix angle (FHA)28MaterialHMMaterial applicationK - Cast iron, M - Stainless steel, N - Non-ferrous metals, P - Steel and cast steelMID number5983644Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsOrdering code ANSIS813HA7.0Overall length - inch (OAL)2.4803Overall length - millimeter (OAL)63Peripheral effective cutting edge count (ZEFP)3Radial rake angle (GAMF)9ShankCylindrical shank DIN 6535 HA
Specifications
| Basic Standard | DIN 6527 L |
| Coating | AlCrN |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.315 |
| Connection diameter - millimeter (DCON MS) | 8 |
| Connection diameter tolerance machine side (TCDCONMS) | h6 |
| Corner chamfer width - millimeter (CHW) | 0.13 |
| Cut length | Short |
| Cutting diameter - inch (DC) | 0.2756 |
| Cutting diameter - millimeter (DC) | 7 |
| Cutting diameter tolerance class (TCDC) | h9 |
| Depth of cut maximum - inch (APMX) | 0.5118 |
| Depth of cut maximum - millimeter (APMX) | 13 |
| EDP number | 642245 |
| Flute count (NOF) | 3 |
| Flute helix angle (FHA) | 28 |
| Material | HM |
| Material application | K - Cast iron, M - Stainless steel, N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 5983644 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Ordering code ANSI | S813HA7.0 |
| Overall length - inch (OAL) | 2.4803 |
| Overall length - millimeter (OAL) | 63 |
| Peripheral effective cutting edge count (ZEFP) | 3 |
| Radial rake angle (GAMF) | 9 |
| Shank | Cylindrical shank DIN 6535 HA |
5983644
