Dormer E5475/8NO7 5976434 G(BSP) Machine Tap Straight Flute 4FL 5/8 inch x 14
- Write a review
$269.55
Basic StandardISO 2284Clamping Length - millimeter (LSC)18Clamping width - inch0.5512Clamping width - millimeter (WSC)18CoatingBrightCoating property (CTP)4Connection diameter - inch (DCON MS)0.7087Connection diameter - millimeter (DCON MS)91Coolant supply property (CSP)14EDP number340684Flute count (NOF)21Flute Geometry (FDC)Straight Flute GeometryHand (Cutting direction)RightMaterialHSSMaterial applicationP - Steel and cast steelMID number5976434Ordering code ANSIE5475/8NO7Overall length - inch (OAL)3.5827Overall length - millimeter (OAL)91Premachined hole diameter - inch (PHD)0.8268Premachined hole diameter - millimeter (PHD)21ShankCylindrical shank with SquareThread diameter - inch (TD)0.902Thread diameter - millimeter (TD)22.911Thread diameter size (TDZ)5/8Thread form (THFT)G - British standard pipe fastening - G seriesThreading length - inch (THL)1.0236Threading length - millimeter (THL)26Threads per inch (TPI)14Usable length (ULDR)1.5
Specifications
| Basic Standard | ISO 2284 |
| Clamping Length - millimeter (LSC) | 18 |
| Clamping width - inch | 0.5512 |
| Clamping width - millimeter (WSC) | 18 |
| Coating | Bright |
| Coating property (CTP) | 4 |
| Connection diameter - inch (DCON MS) | 0.7087 |
| Connection diameter - millimeter (DCON MS) | 91 |
| Coolant supply property (CSP) | 14 |
| EDP number | 340684 |
| Flute count (NOF) | 21 |
| Flute Geometry (FDC) | Straight Flute Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS |
| Material application | P - Steel and cast steel |
| MID number | 5976434 |
| Ordering code ANSI | E5475/8NO7 |
| Overall length - inch (OAL) | 3.5827 |
| Overall length - millimeter (OAL) | 91 |
| Premachined hole diameter - inch (PHD) | 0.8268 |
| Premachined hole diameter - millimeter (PHD) | 21 |
| Shank | Cylindrical shank with Square |
| Thread diameter - inch (TD) | 0.902 |
| Thread diameter - millimeter (TD) | 22.911 |
| Thread diameter size (TDZ) | 5/8 |
| Thread form (THFT) | G - British standard pipe fastening - G series |
| Threading length - inch (THL) | 1.0236 |
| Threading length - millimeter (THL) | 26 |
| Threads per inch (TPI) | 14 |
| Usable length (ULDR) | 1.5 |
5976434
