Pramet 12L2R060B20-SZP12 6761634 End Milling Cutter - Copy And Profile
- Write a review
$323.89
Axial rake angle (GAMP)-10Clamping Type Code (MTP)Screw clamping through holeConnection diameter - inch (DCON MS)0.787Connection diameter - millimeter (DCON MS)20Connection size code machine side (CZC MS)-Cutting diameter maximum - inch (DCX)0.472Cutting diameter maximum - millimeter (DCX)12Depth of cut maximum - millimeter (APMX)10.7Functional length - millimeter (LF)86.5Hand (Cutting direction)RightInsert group used in the toolZP 12Insert index count (NOI)2Maximum ramping angle (RMPX)10.7Not recomendedFinishing - very good surface qualityOverall length - inch (OAL)4.37Overall length - millimeter (OAL)111Peripheral effective cutting edge count (ZEFP)2Possible useRoughingRadial rake angle (GAMF)0Rotational speed maximum (RPMX)21000ShankWeldon shank DIN 1835BUsable Length - millimeter (LU)60Usable Length maximum - millimeter (LUX)23.8
Specifications
| Axial rake angle (GAMP) | -10 |
| Clamping Type Code (MTP) | Screw clamping through hole |
| Connection diameter - inch (DCON MS) | 0.787 |
| Connection diameter - millimeter (DCON MS) | 20 |
| Connection size code machine side (CZC MS) | - |
| Cutting diameter maximum - inch (DCX) | 0.472 |
| Cutting diameter maximum - millimeter (DCX) | 12 |
| Depth of cut maximum - millimeter (APMX) | 10.7 |
| Functional length - millimeter (LF) | 86.5 |
| Hand (Cutting direction) | Right |
| Insert group used in the tool | ZP 12 |
| Insert index count (NOI) | 2 |
| Maximum ramping angle (RMPX) | 10.7 |
| Not recomended | Finishing - very good surface quality |
| Overall length - inch (OAL) | 4.37 |
| Overall length - millimeter (OAL) | 111 |
| Peripheral effective cutting edge count (ZEFP) | 2 |
| Possible use | Roughing |
| Radial rake angle (GAMF) | 0 |
| Rotational speed maximum (RPMX) | 21000 |
| Shank | Weldon shank DIN 1835B |
| Usable Length - millimeter (LU) | 60 |
| Usable Length maximum - millimeter (LUX) | 23.8 |
6761634
