1785NRM14 1012906 Non-Relieved Style Tap 3FL M14 x 2.00 mm
- Write a review
$25.24
Basic StandardANSIClamping width - fractional inch (WSC)1/2Clamping width - inch0.322CoatingBrightConnection diameter - millimeter (DCON MS)1/2Connection diameter - inch (DCON MS)0.322Flute count (NOF)3Flute Geometry (FDC)Spiral Point GeometryHand (Cutting direction)RightMaterialHSSOverall length - millimeter (OAL)0.322Overall length - fractional inch (OAL)3.19/32Overall length - inch (OAL)3.5938ShankCylindrical shank with SquareThread diameter size (TDZ)14Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.0787Thread pitch - millimeter (TP)2Threading length - fractional inch (THL)1.21/32Tolerance limitD7Usable length (ULDR)2.5
Specifications
| Basic Standard | ANSI |
| Clamping width - fractional inch (WSC) | 1/2 |
| Clamping width - inch | 0.322 |
| Coating | Bright |
| Connection diameter - millimeter (DCON MS) | 1/2 |
| Connection diameter - inch (DCON MS) | 0.322 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Spiral Point Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS |
| Overall length - millimeter (OAL) | 0.322 |
| Overall length - fractional inch (OAL) | 3.19/32 |
| Overall length - inch (OAL) | 3.5938 |
| Shank | Cylindrical shank with Square |
| Thread diameter size (TDZ) | 14 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.0787 |
| Thread pitch - millimeter (TP) | 2 |
| Threading length - fractional inch (THL) | 1.21/32 |
| Tolerance limit | D7 |
| Usable length (ULDR) | 2.5 |
1785NRM14
