Pramet 32L2R070B32-SZP32-C 6761641 End Milling Cutter - Copy And Profile
- Write a review
$468.87
Axial rake angle (GAMP)-10Clamping Type Code (MTP)Screw clamping through holeConnection diameter - inch (DCON MS)1.26Connection diameter - millimeter (DCON MS)32Connection size code machine side (CZC MS)-Coolant supply property (CSP)1Cutting diameter maximum - inch (DCX)1.26Cutting diameter maximum - millimeter (DCX)32Depth of cut maximum - millimeter (APMX)28.6Functional length - millimeter (LF)95.5Hand (Cutting direction)RightInsert group used in the toolZP 32Insert index count (NOI)2Maximum ramping angle (RMPX)28.6Not recomendedFinishing - very good surface qualityOverall length - inch (OAL)5.157Overall length - millimeter (OAL)131Peripheral effective cutting edge count (ZEFP)2Possible useRoughingRadial rake angle (GAMF)0Rotational speed maximum (RPMX)18500ShankWeldon shank DIN 1835BUsable Length - millimeter (LU)70
Specifications
| Axial rake angle (GAMP) | -10 |
| Clamping Type Code (MTP) | Screw clamping through hole |
| Connection diameter - inch (DCON MS) | 1.26 |
| Connection diameter - millimeter (DCON MS) | 32 |
| Connection size code machine side (CZC MS) | - |
| Coolant supply property (CSP) | 1 |
| Cutting diameter maximum - inch (DCX) | 1.26 |
| Cutting diameter maximum - millimeter (DCX) | 32 |
| Depth of cut maximum - millimeter (APMX) | 28.6 |
| Functional length - millimeter (LF) | 95.5 |
| Hand (Cutting direction) | Right |
| Insert group used in the tool | ZP 32 |
| Insert index count (NOI) | 2 |
| Maximum ramping angle (RMPX) | 28.6 |
| Not recomended | Finishing - very good surface quality |
| Overall length - inch (OAL) | 5.157 |
| Overall length - millimeter (OAL) | 131 |
| Peripheral effective cutting edge count (ZEFP) | 2 |
| Possible use | Roughing |
| Radial rake angle (GAMF) | 0 |
| Rotational speed maximum (RPMX) | 18500 |
| Shank | Weldon shank DIN 1835B |
| Usable Length - millimeter (LU) | 70 |
6761641
