Dormer R4577.1 5980349 140° Coolant Drill 7.10 mm
- Write a review
$143.05
ApplicationAngleIcon_DICT_SELDrill point 140°Basic StandardDIN 6537 KCoatingTiAlNCoating property (CTP)1Connection diameter - inch (DCON MS)0.315Connection diameter - millimeter (DCON MS)8Connection diameter tolerance machine side (TCDCONMS)h6Coolant supply property (CSP)1Cutting diameter - inch (DC)0.2795Cutting diameter - millimeter (DC)7.1Cutting diameter tolerance class (TCDC)m7EDP number626290Hand (Cutting direction)RightLength chip flute - inch (LCF)1.6142Length chip flute - millimeter (LCF)41MaterialHMMID number5980349Ordering code ANSIR4577.1Overall length - inch (OAL)3.1102Overall length - millimeter (OAL)79Point Angle (SIG)140ShankCylindrical shank DIN 6535 HAShank length - millimeter (LS)36Spiral formCTWUsable length (ULDR)3
Specifications
| ApplicationAngleIcon_DICT_SEL | Drill point 140° |
| Basic Standard | DIN 6537 K |
| Coating | TiAlN |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.315 |
| Connection diameter - millimeter (DCON MS) | 8 |
| Connection diameter tolerance machine side (TCDCONMS) | h6 |
| Coolant supply property (CSP) | 1 |
| Cutting diameter - inch (DC) | 0.2795 |
| Cutting diameter - millimeter (DC) | 7.1 |
| Cutting diameter tolerance class (TCDC) | m7 |
| EDP number | 626290 |
| Hand (Cutting direction) | Right |
| Length chip flute - inch (LCF) | 1.6142 |
| Length chip flute - millimeter (LCF) | 41 |
| Material | HM |
| MID number | 5980349 |
| Ordering code ANSI | R4577.1 |
| Overall length - inch (OAL) | 3.1102 |
| Overall length - millimeter (OAL) | 79 |
| Point Angle (SIG) | 140 |
| Shank | Cylindrical shank DIN 6535 HA |
| Shank length - millimeter (LS) | 36 |
| Spiral form | CTW |
| Usable length (ULDR) | 3 |
5980349
