Pramet 803D-39-117-S40 6820834 Indexable Drill 3 x D
- Write a review
$605.62
Adjustment limit maximum - millimeter (ADJLX)0.5Adjustment limit minimum - millimeter (ADJLN)0.4Clamping Type Code (MTP)Screw clamping through holeConnection diameter - inch (DCON MS)1.575Connection diameter - millimeter (DCON MS)40Connection diameter tolerance machine side (TCDCONMS)h6Coolant supply property (CSP)1Cutting diameter - inch (DC)1.535Cutting diameter - millimeter (DC)39Cutting edge count (CEDC)1Depth of cut maximum - inch (APMX)4.6063Depth of cut maximum - millimeter (APMX)117Flange diameter - millimeter (DF)50Overall length - inch (OAL)8.661Overall length - millimeter (OAL)220Protruding length - inch (LPR)5.9843Protruding length - millimeter (LPR)152ShankCylindrical Shank ISO 9766Shank length - inch (LS)2.6772Shank length - millimeter (LS)68Usable length (ULDR)3Usable Length - inch (LU)4.9803Usable Length - millimeter (LU)126.5
Specifications
| Adjustment limit maximum - millimeter (ADJLX) | 0.5 |
| Adjustment limit minimum - millimeter (ADJLN) | 0.4 |
| Clamping Type Code (MTP) | Screw clamping through hole |
| Connection diameter - inch (DCON MS) | 1.575 |
| Connection diameter - millimeter (DCON MS) | 40 |
| Connection diameter tolerance machine side (TCDCONMS) | h6 |
| Coolant supply property (CSP) | 1 |
| Cutting diameter - inch (DC) | 1.535 |
| Cutting diameter - millimeter (DC) | 39 |
| Cutting edge count (CEDC) | 1 |
| Depth of cut maximum - inch (APMX) | 4.6063 |
| Depth of cut maximum - millimeter (APMX) | 117 |
| Flange diameter - millimeter (DF) | 50 |
| Overall length - inch (OAL) | 8.661 |
| Overall length - millimeter (OAL) | 220 |
| Protruding length - inch (LPR) | 5.9843 |
| Protruding length - millimeter (LPR) | 152 |
| Shank | Cylindrical Shank ISO 9766 |
| Shank length - inch (LS) | 2.6772 |
| Shank length - millimeter (LS) | 68 |
| Usable length (ULDR) | 3 |
| Usable Length - inch (LU) | 4.9803 |
| Usable Length - millimeter (LU) | 126.5 |
6820834
